Re: [PATCH v2 3/3] pci/msi: remove pci_msi_ignore_mask

[Roger Pau Monné]

On Wed, Feb 05, 2025 at 09:17:31AM -0600, Bjorn Helgaas wrote:
> Please run git log --oneline and match the subject line capitalization
> style, i.e.,
> 
>   PCI/MSI: Remove ...
> 
> But it doesn't look like this actually *removes* the functionality, it
> just implements it differently so it can be applied more selectively.
> 
> So maybe the subject should say something like "control use of MSI
> masking per IRQ domain, not globally"

What about:

PCI/MSI: convert pci_msi_ignore_mask to per MSI domain flag

Which is slightly shorter?

> 
> On Tue, Jan 14, 2025 at 11:33:13AM +0100, Roger Pau Monne wrote:
> > Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
> > MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
> > Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
> > event channels, to prevent PCI code from attempting to toggle the maskbit,
> > as it's Xen that controls the bit.
> > 
> > However, the pci_msi_ignore_mask being global will affect devices that use
> > MSI interrupts but are not routing those interrupts over event channels
> > (not using the Xen pIRQ chip).  One example is devices behind a VMD PCI
> > bridge.  In that scenario the VMD bridge configures MSI(-X) using the
> > normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
> > bridge configure the MSI entries using indexes into the VMD bridge MSI
> > table.  The VMD bridge then demultiplexes such interrupts and delivers to
> > the destination device(s).  Having pci_msi_ignore_mask set in that scenario
> > prevents (un)masking of MSI entries for devices behind the VMD bridge.
> > 
> > Move the signaling of no entry masking into the MSI domain flags, as that
> > allows setting it on a per-domain basis.  Set it for the Xen MSI domain
> > that uses the pIRQ chip, while leaving it unset for the rest of the
> > cases.
> > 
> > Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
> > with Xen dropping usage the variable is unneeded.
> > 
> > This fixes using devices behind a VMD bridge on Xen PV hardware domains.
> > 
> > Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
> > Linux cannot use them.  By inhibiting the usage of
> > VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
> > bodge devices behind a VMD bridge do work fine when use from a Linux Xen
> > hardware domain.  That's the whole point of the series.
> > 
> > Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>
> 
> Needs an ack from Thomas.

Thanks, moved him to the 'To:' field.

Regards, Roger.