RE: [PATCH 2/3] dt-bindings: firmware: xilinx: Add conditional pinctrl schema

From: Jain, Ronak
Date: Thu Feb 13 2025 - 06:16:45 EST


Hi Rob,

> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: Wednesday, February 12, 2025 3:24 AM
> To: Jain, Ronak <ronak.jain@xxxxxxx>
> Cc: krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; Simek, Michal
> <michal.simek@xxxxxxx>; Manne, Nava kishore
> <nava.kishore.manne@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 2/3] dt-bindings: firmware: xilinx: Add conditional pinctrl
> schema
>
> On Thu, Feb 06, 2025 at 06:22:43AM -0800, Ronak Jain wrote:
> > Updates the Device Tree bindings for Xilinx firmware by introducing
> > conditional schema references for the pinctrl node.
> >
> > Previously, the pinctrl node directly referenced
> > xlnx,zynqmp-pinctrl.yaml. However, this patch modifies the schema to
> > conditionally apply the correct pinctrl schema based on the compatible
> > property. Specifically:
> > - If compatible contains "xlnx,zynqmp-pinctrl", reference
> > xlnx,zynqmp-pinctrl.yaml.
> > - If compatible contains "xlnx,versal-pinctrl", reference
> > xlnx,versal-pinctrl.yaml.
> >
> > Additionally, an example entry for "xlnx,versal-pinctrl" has been
> > added under the examples section.
> >
> > Signed-off-by: Ronak Jain <ronak.jain@xxxxxxx>
> > ---
> > .../firmware/xilinx/xlnx,zynqmp-firmware.yaml | 20 ++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-
> firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-
> firmware.yaml
> > index 2b72fb9d3c22..d50438b0fca8 100644
> > --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-
> firmware.yaml
> > +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-
> firmware.yaml
> > @@ -76,7 +76,6 @@ properties:
> > type: object
> >
> > pinctrl:
> > - $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
> > description: The pinctrl node provides access to pinconfig and pincontrol
> > functionality available in firmware.
> > type: object
> > @@ -106,6 +105,21 @@ properties:
> > type: object
> > deprecated: true
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: xlnx,zynqmp-firmware
> > + then:
> > + properties:
> > + pinctrl:
> > + $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
> > + else:
> > + properties:
> > + pinctrl:
> > + $ref: /schemas/pinctrl/xlnx,versal-pinctrl.yaml#
>
> The somewhat preferred way to do this would be to do this in the top
> level:
>
> pinctrl:
> type: object
> additionalProperties: true
> properties:
> compatible:
> contains:
> enum:
> - xlnx,zynqmp-pinctrl
> - xlnx,versal-pinctrl
> required:
> - compatible
>
> Otherwise, the pinctrl schema ends up being applied twice.

Thanks for the patch review and inputs. I'll update and send the next version.

Thanks,
Ronak
>
> > +
> > required:
> > - compatible
> >
> > @@ -164,6 +178,10 @@ examples:
> > compatible = "xlnx,versal-fpga";
> > };
> >
> > + pinctrl {
> > + compatible = "xlnx,versal-pinctrl";
> > + };
> > +
> > xlnx_aes: zynqmp-aes {
> > compatible = "xlnx,zynqmp-aes";
> > };
> > --
> > 2.34.1
> >