Re: [PATCH v4 1/9] dt-bindings: mfd: brcm,bcm59056: Convert to YAML

[Rob Herring (Arm)]

On Sat, 15 Feb 2025 10:39:36 +0100, Artur Weber wrote:
> Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from
> TXT to YAML format. This patch does not change any functionality;
> the bindings remain the same.
> 
> The bindings have been split into two parts: the MFD binding and
> a separate binding for the regulator node, to simplify the addition
> of other models later (which have different regulators).
> 
> Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
> ---
> Changes in v4:
> - Made $ref use full schema path
> - Cleaned up example
> - Dropped regulator name list comment
> - Changed description of regulator binding to mention BCM59056
>   explicitly
> - Changed "Power Management IC" to "Power Management Unit" to match
>   official Broadcom naming
> - Renamed mfd/brcm,bcm59056.yaml to mfd/brcm,bcm590xx.yaml
> 
> Changes in v3:
> - Moved regulator node to separate binding
> - Removed quotes around compatibles/vbus property
> - Style fixes for example
> ---
>  .../devicetree/bindings/mfd/brcm,bcm59056.txt      | 39 ----------------
>  .../devicetree/bindings/mfd/brcm,bcm590xx.yaml     | 54 ++++++++++++++++++++++
>  .../bindings/regulator/brcm,bcm59056.yaml          | 51 ++++++++++++++++++++
>  3 files changed, 105 insertions(+), 39 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
Documentation/devicetree/bindings/regulator/brcm,bcm59056.yaml: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250215-bcm59054-v4-1-dbfb2d76a855@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.