Re: [PATCH v4 2/9] dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054
From: Rob Herring (Arm)
Date: Sat Feb 15 2025 - 05:29:19 EST
On Sat, 15 Feb 2025 10:39:37 +0100, Artur Weber wrote:
> The BCM59054 MFD is fairly similar to the BCM59056, and will use
> the same driver. Add compatible and specify the allowed regulator
> nodes.
>
> Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
> ---
> Changes in v4:
> - Fix yamllint errors (missing unevaluatedProperties)
> - Drop comment with regulator name list
> - Use full schema paths for $reg
> - Change description of regulator binding to mention BCM59054
> explicitly
> - Drop quotes around vbus reg name
> - Change "Power Management IC" to "Power Management Unit" to match
> official Broadcom naming
>
> Note that I did not end up moving the regulator refs from
> allOf compatible matches; I explained my reasoning in [1].
>
> [1] https://lore.kernel.org/lkml/ab853605-859d-44c6-8cbd-44391cd677e6@xxxxxxxxx/
>
> Changes in v3:
> - Split regulator node into separate file
> - Removed quotes around compatible
> ---
> .../devicetree/bindings/mfd/brcm,bcm590xx.yaml | 26 +++++++++-
> .../bindings/regulator/brcm,bcm59054.yaml | 56 ++++++++++++++++++++++
> 2 files changed, 80 insertions(+), 2 deletions(-)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
Documentation/devicetree/bindings/regulator/brcm,bcm59054.yaml: Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250215-bcm59054-v4-2-dbfb2d76a855@xxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.