[PATCH v3 2/9] dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus

[Viken Dadhaniya]

Introduce a new YAML schema for QUP-supported peripherals. Define common
properties used across QUP-supported peripherals.

Add property `qcom,gsi-dma-allowed` to configure the Serial Engine (SE) for
QCOM GPI DMA mode.

Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---
 .../soc/qcom/qcom,se-common-props.yaml        | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
new file mode 100644
index 000000000000..a111e51bb1c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,se-common-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QUP Peripheral-specific properties for I2C, SPI and SERIAL bus.
+
+description:
+  The Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) is
+  a programmable module that supports a wide range of serial interfaces
+  such as UART, SPI, I2C, I3C, etc. This defines the common properties used
+  across QUP-supported peripherals.
+
+maintainers:
+  - Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
+  - Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
+
+properties:
+  qcom,gsi-dma-allowed:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Configure the Serial Engine (SE) to transfer data in QCOM GPI DMA mode.
+      By default, FIFO mode (PIO/CPU DMA) will be selected.
+
+additionalProperties: true
-- 
2.34.1