Re: [PATCH 04/13] dt-bindings: soc: airoha: add Documentation for Airoha AN7581 SCU SSR

[Krzysztof Kozlowski]

On Sun, Mar 09, 2025 at 02:29:35PM +0100, Christian Marangi wrote:
> The Airoha AN7581 SoC have in the SCU register space particular
> address that control how some peripheral are configured.
> 
> These are toggeled in the System Status Register and are used to
> toggle Serdes port for USB 3.0 mode or HSGMII, USB 3.0 mode or PCIe2
> or setup port for PCIe mode or Ethrnet mode (HSGMII/USXGMII).
> 
> Modes are mutually exclusive and selecting one mode cause the
> other feature to not work (example a mode in USB 3.0 cause PCIe
> port 2 to not work) This depends also on what is physically
> connected to the Hardware and needs to correctly reflect the
> System Status Register bits.
> 
> Special care is needed for PCIe port 0 in 2 line mode that
> requires both WiFi1 and WiFi2 Serdes port set to PCIe0 2 Line
> mode.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  .../soc/airoha/airoha,an7581-scu-ssr.yaml     | 106 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 107 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/airoha/airoha,an7581-scu-ssr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/airoha/airoha,an7581-scu-ssr.yaml b/Documentation/devicetree/bindings/soc/airoha/airoha,an7581-scu-ssr.yaml
> new file mode 100644
> index 000000000000..4bbf6e3b79a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/airoha/airoha,an7581-scu-ssr.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/airoha/airoha,an7581-scu-ssr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha AN7581 SCU System Status Register
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@xxxxxxxxx>
> +
> +description: >
> +  The Airoha AN7581 SoC have in the SCU register space particular
> +  address that control how some peripheral are configured.
> +
> +  These are toggeled in the System Status Register and are used to
> +  toggle Serdes port for USB 3.0 mode or HSGMII, USB 3.0 mode or PCIe2
> +  or setup port for PCIe mode or Ethrnet mode (HSGMII/USXGMII).

typo, Ethernet

> +
> +  Modes are mutually exclusive and selecting one mode cause the
> +  other feature to not work (example a mode in USB 3.0 cause PCIe
> +  port 2 to not work) This depends also on what is physically
> +  connected to the Hardware and needs to correctly reflect the
> +  System Status Register bits.
> +
> +  Special care is needed for PCIe port 0 in 2 line mode that
> +  requires both WiFi1 and WiFi2 Serdes port set to PCIe0 2 Line
> +  mode.
> +
> +properties:
> +  compatible:
> +    const: airoha,an7581-scu-ssr

That's not a separate device, but part of the SCU.

But more important - such definition of choice of serial engines is
really not flexible, not reabable and not helping integrating into DTS.
Are you going to grow this for next chip airoha,serdes-wifi20, then
airoha,serdes-wifi21, 22... ? And then how the if:then: would look like?

Assuming you do not have here child-parent relationship, like usually
for serial engines, so then this should be somehow list of devices
(strings) you want to run.

Best regards,
Krzysztof