[PATCH v10 05/10] PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback

[Frank Li]

parent_bus_offset in resource_entry can indicate address information just
ahead of PCIe controller. Most system's bus fabric use 1:1 map between
input and output address. but some hardware like i.MX8QXP doesn't use 1:1
map. See below diagram:

            ┌─────────┐                    ┌────────────┐
 ┌─────┐    │         │ IA: 0x8ff8_0000    │            │
 │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
 └─────┘    │   │     │ IA: 0x8ff0_0000 │  │            │
  CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
0x7ff8_0000─┼───┘  │  │             │   │  │            │
            │      │  │             │   │  │            │   PCI Addr
0x7ff0_0000─┼──────┘  │             │   └──► IOSpace   ─┼────────────►
            │         │             │      │            │    0
0x7000_0000─┼────────►├─────────┐   │      │            │
            └─────────┘         │   └──────► CfgSpace  ─┼────────────►
             BUS Fabric         │          │            │    0
                                │          │            │
                                └──────────► MemSpace  ─┼────────────►
                        IA: 0x8000_0000    │            │  0x8000_0000
                                           └────────────┘

bus@5f000000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x80000000 0x0 0x70000000 0x10000000>;

	pcie@5f010000 {
		compatible = "fsl,imx8q-pcie";
		reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
		reg-names = "dbi", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		device_type = "pci";
		bus-range = <0x00 0xff>;
		ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
			 <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
	...
	};
};

Term Intermediate address (IA) here means the address just before PCIe
controller. After ATU use this IA instead CPU address, cpu_addr_fixup() can
be removed.

Use reg-name "config" to detect parent_bus_addr_offset. Suppose the offset
is the same for all kinds of address translation.

Just set parent_bus_offset, but doesn't use it, so no functional change
intended yet.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
change from v9 to v10
- call helper dw_pcie_init_parent_bus_offset()

chagne from v8 to v9
- use resoure_entry parent_bus_offset to simple code logic
- add check for use_parent_dt_ranges and cpu_addr_fixup to make sure only
one set.

Change from v7 to v8
- Add dev_warning_once at dw_pcie_iatu_detect() to reminder
cpu_addr_fixup() user to correct their code
- use 'use_parent_dt_ranges' control enable use dt parent bus node ranges.
- rename dw_pcie_get_untranslate_addr to dw_pcie_get_parent_addr().
- of_property_read_reg() already have comments, so needn't add more.
- return actual err code from function

Change from v6 to v7
Add a resource_size_t parent_bus_addr local varible to fix 32bit build
error.
| Reported-by: kernel test robot <lkp@xxxxxxxxx>
| Closes: https://lore.kernel.org/oe-kbuild-all/202410291546.kvgEWJv7-lkp@xxxxxxxxx/

Chagne from v5 to v6
-add comments for of_property_read_reg().

Change from v4 to v5
- remove confused 0x5f00_0000 range in sample dts.
- reorder address at above diagram.

Change from v3 to v4
- none

Change from v2 to v3
- %s/cpu_untranslate_addr/parent_bus_addr/g
- update diagram.
- improve commit message.

Change from v1 to v2
- update because patch1 change get untranslate address method.
- add using_dtbus_info in case break back compatibility for exited platform.
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index c57831902686e..eaa6dd4c7edda 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -478,6 +478,15 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
 	bridge->ops = &dw_pcie_ops;
 	bridge->child_ops = &dw_child_pcie_ops;
 
+	/*
+	 * visconti_pcie_cpu_addr_fixup() use pp->io_base,
+	 * so have to call dw_pcie_init_parent_bus_offset() after init
+	 * pp->io_base.
+	 */
+	ret = dw_pcie_init_parent_bus_offset(pci, "config", pp->cfg0_base);
+	if (ret)
+		return ret;
+
 	if (pp->ops->init) {
 		ret = pp->ops->init(pp);
 		if (ret)

-- 
2.34.1