[PATCH v2 09/13] iio: light: al3010: Move devm_add_action_or_reset back to _probe

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

In a preparation to the regmap transition.

Improve error handling using dev_err_probe().

Signed-off-by: David Heidelberg <david@xxxxxxx>
---
 drivers/iio/light/al3010.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
index 8c004a9239aef246a8c6f6c3f4acd6b760ee8249..8098c92c9572befe92d00ef0785ded5e1a08d587 100644
--- a/drivers/iio/light/al3010.c
+++ b/drivers/iio/light/al3010.c
@@ -89,12 +89,6 @@ static int al3010_init(struct al3010_data *data)
 	if (ret < 0)
 		return ret;
 
-	ret = devm_add_action_or_reset(&data->client->dev,
-				       al3010_set_pwr_off,
-				       data);
-	if (ret < 0)
-		return ret;
-
 	ret = i2c_smbus_write_byte_data(data->client, AL3010_REG_CONFIG,
 					FIELD_PREP(AL3010_GAIN_MASK,
 						   AL3XXX_RANGE_3));
@@ -195,6 +189,10 @@ static int al3010_probe(struct i2c_client *client)
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, al3010_set_pwr_off, data);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add action\n");
+
 	return devm_iio_device_register(dev, indio_dev);
 }
 

-- 
2.49.0