Re: [PATCH v1 1/3] arm64: defconfig: enable PCI Power Control for PCIe3
From: Wenbin Yao (Consultant)
Date: Tue Mar 25 2025 - 22:25:05 EST
On 3/24/2025 3:38 PM, Krzysztof Kozlowski wrote:
On 24/03/2025 08:09, Wenbin Yao (Consultant) wrote:
On 3/21/2025 5:43 PM, Bartosz Golaszewski wrote:
On Fri, Mar 21, 2025 at 8:37 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
On 20/03/2025 06:55, Wenbin Yao wrote:
From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Enable the pwrctrl driver, which is utilized to manage the power supplies
of the devices connected to the PCI slots. This ensures that the voltage
rails of the x8 PCI slots on the X1E80100 - QCP can be correctly turned
on/off if they are described under PCIe port device tree node.
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Signed-off-by: Wenbin Yao <quic_wenbyao@xxxxxxxxxxx>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 85ec2fba1..de86d1121 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -245,6 +245,7 @@ CONFIG_PCIE_LAYERSCAPE_GEN4=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
+CONFIG_PCI_PWRCTL_SLOT=y
Bartosz,
Wasn't the intention to select it the same way as PCI_PWRCTL_PWRSEQ is
selected?
Best regards,
Krzysztof
For sure. I would expect there to be something like:
select PCI_PWRCTL_SLOT if ARCH_QCOM
in Kconfig and nothing in defconfig.
Bartosz
IIUC, pci slot power driver is a common driver that could be used by all DT
based platform.
You are not responding to the raised problem.
There is a slight difference between PCI_PWRCTL_SLOT and PCI_PWRCTL_PWRSEQ.
PCI_PWRCTL_PWRSEQ is selected by ath11k/ath12k, but PCI_PWRCTL_SLOT has no
specific endpoint device driver to select it. Could PCI_PWRCTL_SLOT be
selected along with HAVE_PWRCTL when ARCH_QCOM is enabled? Or can we add
select PCI_PWRCTL_SLOT if HAVE_PWRCTL in the Kconfig of portdrv?
Best regards,
Krzysztof
--
With best wishes
Wenbin