Re: [PATCH v3 7/8] arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Displayy

From: Frank Li
Date: Thu Mar 27 2025 - 12:31:32 EST


On Thu, Mar 27, 2025 at 04:52:42PM +0100, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maudspierings@xxxxxxxxxxxxxx>
>
> Add the BOE av101hdt-a10 variant of the Moduline Display, this variant
> comes with a 10.1 1280x720 display with a touchscreen (not working in
> mainline).
>
> Signed-off-by: Maud Spierings <maudspierings@xxxxxxxxxxxxxx>
>
> ---
> Currently the backlight driver is not available, this will be upstreamed
> in a future patch series. It is a Maxim max25014atg.
>
> The touchscreen has a Cypress CYAT81658-64AS48 controller which as far as
> I know is not supported upstream, the driver we currently use for this is
> a mess and I doubt we will be able to get it in an upstreamable state.
> ---
> ...tx8p-ml81-moduline-display-106-av101hdt-a10.dts | 100 +++++++++++++++++++++
> 1 file changed, 100 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..1917e22001a1815a6540f00cf039ff352801cda8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts

why not use dt overlay to handle difference dsplay module.

Frank

> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2025 GOcontroll B.V.
> + * Author: Maud Spierings <maudspierings@xxxxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp-tx8p-ml81-moduline-display-106.dtsi"
> +
> +/ {
> + model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
> +
> + panel {
> + compatible = "boe,av101hdt-a10";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_panel>;
> + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + power-supply = <&reg_3v3_per>;
> +
> + port {
> + panel_lvds_in: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> + };
> +
> + reg_vbus: regulator-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb-c-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + power-supply = <&reg_6v4>;
> + regulator-always-on;
> + };
> +};
> +
> +&lcdif2 {
> + status = "okay";
> +};
> +
> +&usb3_1 {
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> +
> + port {
> + usb1_hs_ep: endpoint {
> + remote-endpoint = <&high_speed_ep>;
> + };
> + };
> +
> + connector {
> + compatible = "usb-c-connector";
> + pd-disable;
> + data-role = "host";
> + vbus-supply = <&reg_vbus>;
> +
> + port {
> + high_speed_ep: endpoint {
> + remote-endpoint = <&usb1_hs_ep>;
> + };
> + };
> + };
> +};
> +
> +&lvds_bridge {
> + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
> + <&clk IMX8MP_VIDEO_PLL1>;

fix indentation.

> + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
> + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
> + assigned-clock-rates = <0>, <1054620000>;
> + status = "okay";
> +
> + ports {
> + port@1 {
> + ldb_lvds_ch0: endpoint {
> + remote-endpoint = <&panel_lvds_in>;
> + };
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_panel: panelgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 /* COM pin 157 */
> + MX8MP_DSE_X1
> + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 /* COM pin 159 */
> + MX8MP_DSE_X1
> + >;
> + };
> +};
>
> --
> 2.49.0
>
>