Re: [PATCH net-next 4/4] checkpatch: check for comment explaining rgmii(|-rxid|-txid) PHY modes

[Matthias Schiffer]

On Tue, 2025-04-15 at 15:36 +0200, Matthias Schiffer wrote:
> On Tue, 2025-04-15 at 15:20 +0200, Andrew Lunn wrote:
> > 
> > > +  **UNCOMMENTED_RGMII_MODE**
> > > +    Historially, the RGMII PHY modes specified in Device Trees have been
> > > +    used inconsistently, often referring to the usage of delays on the PHY
> > > +    side rather than describing the board.
> > > +
> > > +    PHY modes "rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock
> > > +    signal to be delayed on the PCB; this unusual configuration should be
> > > +    described in a comment. If they are not (meaning that the delay is realized
> > > +    internally in the MAC or PHY), "rgmii-id" is the correct PHY mode.
> > 
> > It is unclear to me how much ctx_has_comment() will return. Maybe
> > include an example here of how it should look. I'm assuming:
> > 
> > /* RGMII delays added via PCB traces */
> > &enet2 {
> >     phy-mode = "rgmii";
> >     status = "okay";
> > 
> > fails, but
> > 
> > &enet2 {
> >     /* RGMII delays added via PCB traces */
> >     phy-mode = "rgmii";
> >     status = "okay";
> > 
> > passes?
> 
> Yes, it works like that. I can't claim to fully understand the checkpatch code
> handling comments, but I copied it from other similar checks and tested it on a
> few test patches.
> 
> One thing to note is that I implemented it as a CHK() and not a WARN() because
> that's what is used for other comment checks like DATA_RACE - meaning it will
> only trigger with --strict.

Oops, DATA_RACE is actually a WARN(). I must have copied it from some other
comment check that uses CHK(). Let me know which you want me to use.

> 
> 
> > 
> > >  
> > >  Commit message
> > >  --------------
> > > diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> > > index 784912f570e9d..57fcbd4b63ede 100755
> > > --- a/scripts/checkpatch.pl
> > > +++ b/scripts/checkpatch.pl
> > > @@ -3735,6 +3735,17 @@ sub process {
> > >  			}
> > >  		}
> > >  
> > > +# Check for RGMII phy-mode with delay on PCB
> > > +		if ($realfile =~ /\.dtsi?$/ && $line =~ /^\+\s*(phy-mode|phy-connection-type)\s*=\s*"/ &&
> > 
> > I don't grok perl. Is this only looking a dtsi files? .dts files
> > should also be checked.
> 
> It is a regular expression - the ? makes the previous character optional,
> matching both .dts and .dtsi files.
> 
> Best,
> Matthias
> 
> 
> > 
> > Thanks for working on this, it will be very useful.
> > 
> > 	Andrew
> 

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/