[GIT PULL] aspeed: First batch of devicetree changes for 6.19
From: Andrew Jeffery
Date: Thu Oct 30 2025 - 19:10:29 EST
Hello SoC maintainers,
The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:
Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux.git tags/aspeed-6.19-devicetree-0
for you to fetch changes up to 6953afcd81a2cc73784e3dd23faa0a1aaf97441a:
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module (2025-10-17 16:44:13 +1030)
----------------------------------------------------------------
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes:
- The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems
New platforms:
- IBM Balcones
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed.
- Meta Yosemite5
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components.
Updated platforms:
- clemente (Meta): LEDs, shunt resistor configuration
- santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs
There are a scattering of one-off changes and devicetree cleanups for other
platforms as well.
----------------------------------------------------------------
Daniel Hsu (1):
ARM: dts: aspeed: harma: Add MCTP I2C controller node
Eddie James (4):
dt-bindings: arm: aspeed: add IBM Balcones board
dt-bindings: arm: aspeed: add IBM Bonnell board
ARM: dts: aspeed: Add Balcones system
ARM: dts: aspeed: Fix max31785 fan properties
Fred Chen (7):
ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability
ARM: dts: aspeed: santabarbara: Add sensor support for extension boards
ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led
ARM: dts: aspeed: santabarbara: Add gpio line name
ARM: dts: aspeed: santabarbara: Add AMD APML interface support
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module
Kevin Tung (2):
dt-bindings: arm: aspeed: add Meta Yosemite5 board
ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
Leo Wang (2):
ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i
ARM: dts: aspeed: clemente: Add HDD LED GPIO
Zane Li (1):
ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 3 +
arch/arm/boot/dts/aspeed/Makefile | 2 +
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts | 9 +-
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 +
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts | 919 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 14 ++
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 1067 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts | 609 ++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 4 -
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts | 8 -
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 12 -
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 36 ---
arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi | 779 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 769 +--------------------------------------------------------------
14 files changed, 3405 insertions(+), 834 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi