Re: [PATCH v2 0/6] ALSA: ctxfi: Add support for Onkyo SE-300PCIE

[Harin Lee]

Hi Takashi,

The official Windows driver does not expose a specific mixer control
for this. It implicitly reserves RCA for stereo output and Front for
7.1ch surround, and simply appears as 'Speaker' device in the Control
Panel.

Please let me know if there are any additional points I should address
before I send v3.

Thanks,
Harin Lee

On 11/22/25 6:29 PM, Takashi Iwai wrote:
> On Sat, 22 Nov 2025 10:00:29 +0100,
> Harin Lee wrote:
> > I noticed that 'rca_state' in patch 5 uses 'unsigned char'. While it is
> > safe due to the bounds check, I plan to switch it to 'unsigned int' for
> > strict correctness.
> >
> > I also have two questions regarding conventions:
> >
> > 1. ALSA control name (on patch 5): Is "Dedicated Output Playback Enum"
> > acceptable, or would you prefer a simpler name?
>
> I personally prefer a simpler one, but maybe it'd be a question how
> this (or equivalent) control is called on Windows or other OS.
> If it's also "Dedicated Output", then we can use it as is, too.
>
> > 2. CA20K2 port logic (on patch 6): The condition
> > 'if ((idx < 4) && ((hw->model != CTOK0010) || (idx < 3)))' handles
> > the non-standard RCA port mapping. Does this line require additional
> > comments or a helper function for better readability?
>
> Sure, a more comment wouldn't hurt.
>
>
> thanks,
>
> Takashi
>
> > Please let me know if you would prefer me to send a v3.
> >
> > On 11/22/25 12:22 AM, Harin Lee wrote:
> > > I added support for the Onkyo SE-300PCIE (OK0010), a Creative X-Fi
> > > CA20K2-based sound card with dual TI PCM1798 DACs, a single TI PCM1681
> > > DAC for 7.1ch output, and a CS5364 ADC. This model differs
> > > significantly from other CA20K2-based variants.
> > >
> > > Since official driver support for this hardware was discontinued a long
> > > time ago, this patch series enables the card to be used on modern
> > > platforms.
> > >
> > > This patch series was developed using QEMU vfio tracing, and PCIe BAR
> > > dumps. Tested with analog output (up to 192kHz) and line/microphone
> > > input (up to 96kHz) at various sample rates.
> > >
> > > Changes in v2:
> > >    - Fix coding style issue (mixed declaration and code) in
> > >      dedicated_rca_put().
> > >
> > > Harin Lee (6):
> > >     ALSA: ctxfi: Add hw parameter to daio_mgr_dao_init()
> > >     ALSA: ctxfi: Add ADC helper functions for GPIO
> > >     ALSA: ctxfi: Use explicit output flag for DAIO resources
> > >     ALSA: ctxfi: Refactor resource alloc for sparse mappings
> > >     ALSA: ctxfi: Add support for dedicated RCA switching
> > >     ALSA: ctxfi: Add support for Onkyo SE-300PCIE (OK0010)
> > >
> > >    sound/pci/ctxfi/ctatc.c      | 97 ++++++++++++++++++++++++++----------
> > >    sound/pci/ctxfi/ctatc.h      |  8 +--
> > >    sound/pci/ctxfi/ctdaio.c     | 18 ++++---
> > >    sound/pci/ctxfi/ctdaio.h     |  3 ++
> > >    sound/pci/ctxfi/cthardware.h |  4 +-
> > >    sound/pci/ctxfi/cthw20k1.c   |  3 +-
> > >    sound/pci/ctxfi/cthw20k2.c   | 79 ++++++++++++++++++++++-------
> > >    sound/pci/ctxfi/ctmixer.c    | 73 +++++++++++++++++++++++++--
> > >    8 files changed, 223 insertions(+), 62 deletions(-)