Re: [PATCH v3 4/4] power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors

[Manivannan Sadhasivam]

On Tue, Nov 25, 2025 at 05:20:36AM -0800, Bartosz Golaszewski wrote:
> On Tue, 25 Nov 2025 12:12:29 +0100, Manivannan Sadhasivam via B4 Relay
> <devnull+manivannan.sadhasivam.oss.qualcomm.com@xxxxxxxxxx> said:
> > From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> >
> > This driver is used to control the PCIe M.2 connectors of different
> > Mechanical Keys attached to the host machines and supporting different
> > interfaces like PCIe/SATA, USB/UART etc...
> >
> > Currently, this driver supports only the Mechanical Key M connectors with
> > PCIe interface. The driver also only supports driving the mandatory 3.3v
> > and optional 1.8v power supplies. The optional signals of the Key M
> > connectors are not currently supported.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> > ---
> >
> 
> This looks good now. Do you think it makes sense to take it for v6.19 (provided
> the bindings get reviewed) or should it wait for the next cycle and go with the
> other changes?
> 

This can get merged for v6.19 post bindings review.

- Mani

-- 
மணிவண்ணன் சதாசிவம்