Re: [PATCH v3 4/4] power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors

[Bartosz Golaszewski]

On Tue, 25 Nov 2025 12:12:29 +0100, Manivannan Sadhasivam via B4 Relay
<devnull+manivannan.sadhasivam.oss.qualcomm.com@xxxxxxxxxx> said:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
>
> This driver is used to control the PCIe M.2 connectors of different
> Mechanical Keys attached to the host machines and supporting different
> interfaces like PCIe/SATA, USB/UART etc...
>
> Currently, this driver supports only the Mechanical Key M connectors with
> PCIe interface. The driver also only supports driving the mandatory 3.3v
> and optional 1.8v power supplies. The optional signals of the Key M
> connectors are not currently supported.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> ---
>

This looks good now. Do you think it makes sense to take it for v6.19 (provided
the bindings get reviewed) or should it wait for the next cycle and go with the
other changes?

Bart