Re: [PATCH 1/3] dt-bindings: interconnect: add clocks property to enable QoS on qcs8300

[Rob Herring (Arm)]

On Fri, 28 Nov 2025 20:31:04 +0530, Odelu Kukatla wrote:
> Add 'clocks' property to enable QoS configuration. This property
> enables the necessary clocks for QoS configuration.
> 
> QoS configuration is essential for ensuring that latency sensitive
> components such as CPUs and multimedia engines receive prioritized
> access to memory and interconnect resources. This helps to manage
> bandwidth and latency across subsystems, improving system responsiveness
> and performance in concurrent workloads.
> 
> Both 'reg' and 'clocks' properties are optional. If either is missing,
> QoS configuration will be skipped. This behavior is controlled by the
> 'qos_requires_clocks' flag in the driver, which ensures that QoS
> configuration is bypassed when required clocks are not defined.
> 
> Signed-off-by: Odelu Kukatla <odelu.kukatla@xxxxxxxxxxxxxxxx>
> ---
>  .../interconnect/qcom,qcs8300-rpmh.yaml       | 53 ++++++++++++++++---
>  1 file changed, 47 insertions(+), 6 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128150106.13849-2-odelu.kukatla@xxxxxxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.