Re: [PATCH v7 1/2] dt-bindings: rtc: Add pcf85053 support

[Rob Herring (Arm)]

On Thu, 27 Nov 2025 17:34:55 +0530, Lakshay Piplani wrote:
> Add device tree bindings for NXP PCF85053 RTC chip.
> 
> Signed-off-by: Pankit Garg <pankit.garg@xxxxxxx>
> Signed-off-by: Lakshay Piplani <lakshay.piplani@xxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> V6 -> V7: - no changes
> 	  - Added Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> V5 -> V6: - Dropped driver-specific commentary from property descriptions.
> 	  - Simplified and clarified descriptions for better readability.
> V4 -> V5: - Updated schema validation logic to enforce correct combinations of
>             'nxp,interface' and 'nxp,write-access' using oneOf clauses.
>           - Refined property descriptions for clarity and hardware alignment.
> V3 -> V4: Add dedicated nxp,pcf85053.yaml.
>           Remove entry from trivial-rtc.yaml.
> V2 -> V3: Moved MAINTAINERS file changes to the driver patch
> V1 -> V2: Handled dt-bindings by trivial-rtc.yaml
> 
>  .../devicetree/bindings/rtc/nxp,pcf85053.yaml | 114 ++++++++++++++++++
>  1 file changed, 114 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85053.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-zones.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251127120456.1849177-1-lakshay.piplani@xxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.