Re: [PATCH 1/2] pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu

[Ming Qian(OSS)]

Hi Frank,

On 11/22/2025 12:11 AM, Frank Li wrote:
> On Fri, Nov 21, 2025 at 04:19:08PM +0800, ming.qian@xxxxxxxxxxx wrote:
> > From: Ming Qian <ming.qian@xxxxxxxxxxx>
> >
> > The ADB in the VPUMIX domain has no separate reset and clock
> > enable bits, but is ungated and reset together with the VPUs.
> > So we can't reset G1 or G2 separately, it may led to the system hang.
> > Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.
> > Let imx8mq_vpu_power_notifier() do really vpu reset.
> >
> > Fixes: 608d7c325e85 ("soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl")
> > Signed-off-by: Ming Qian <ming.qian@xxxxxxxxxxx>
> > ---
> >   drivers/pmdomain/imx/imx8m-blk-ctrl.c | 4 ----
> >   1 file changed, 4 deletions(-)
> >
> > diff --git a/drivers/pmdomain/imx/imx8m-blk-ctrl.c b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> > index 5c83e5599f1e..1f07ff041295 100644
> > --- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> > +++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
> > @@ -852,16 +852,12 @@ static const struct imx8m_blk_ctrl_domain_data imx8mq_vpu_blk_ctl_domain_data[]
> >   		.clk_names = (const char *[]){ "g1", },
> >   		.num_clks = 1,
> >   		.gpc_name = "g1",
> > -		.rst_mask = BIT(1),
> > -		.clk_mask = BIT(1),
>
> Does this bit not exist or just put VPU's reset bit here previously?
>
> Frank

In NXP's internal VPU solution of i.MX8MQ, this vpu-blk-ctrl is not used 
directly.
The internal driver always reset the G1 and G2 VPU together.
Just like imx8mq_vpu_power_notifier() does.

Regards,
Ming

> >   	},
> >   	[IMX8MQ_VPUBLK_PD_G2] = {
> >   		.name = "vpublk-g2",
> >   		.clk_names = (const char *[]){ "g2", },
> >   		.num_clks = 1,
> >   		.gpc_name = "g2",
> > -		.rst_mask = BIT(0),
> > -		.clk_mask = BIT(0),
> >   	},
> >   };
> >
> > --
> > 2.34.1