[PATCH v4 04/13] soc: qcom: geni-se: Handle core clk in geni_se_clks_off() and geni_se_clks_on()

[Praveen Talari]

Currently, core clk is handled individually in protocol drivers like
the I2C driver. Move this clock management to the common clock APIs
(geni_se_clks_on/off) that are already present in the common GENI SE
driver to maintain consistency across all protocol drivers.

Core clk is now properly managed alongside the other clocks (se->clk
and wrapper clocks) in the fundamental clock control functions,
eliminating the need for individual protocol drivers to handle this
clock separately.

Signed-off-by: Praveen Talari <praveen.talari@xxxxxxxxxxxxxxxx>
---
 drivers/soc/qcom/qcom-geni-se.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 75e722cd1a94..2e41595ff912 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -583,6 +583,7 @@ static void geni_se_clks_off(struct geni_se *se)
 
 	clk_disable_unprepare(se->clk);
 	clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
+	clk_disable_unprepare(se->core_clk);
 }
 
 /**
@@ -619,7 +620,18 @@ static int geni_se_clks_on(struct geni_se *se)
 
 	ret = clk_prepare_enable(se->clk);
 	if (ret)
-		clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
+		goto err_bulk_clks;
+
+	ret = clk_prepare_enable(se->core_clk);
+	if (ret)
+		goto err_se_clk;
+
+	return 0;
+
+err_se_clk:
+	clk_disable_unprepare(se->clk);
+err_bulk_clks:
+	clk_bulk_disable_unprepare(wrapper->num_clks, wrapper->clks);
 	return ret;
 }
 
-- 
2.34.1