Re: [PATCH 1/4] dt-bindings: hwmon: Add qcom,bcl-hwmon yaml bindings

[Manaf Meethalavalappu Pallikunhi]

Hi Dimitry,

On 2/6/2026 2:38 PM, Dmitry Baryshkov wrote:
> On Fri, Feb 06, 2026 at 02:44:05AM +0530, Manaf Meethalavalappu Pallikunhi wrote:
> > Add devicetree binding documentation for Qualcomm PMIC Battery Current
> > Limiting (BCL) hardware monitor. The BCL hardware provides monitoring
> > and alarm functionality for battery overcurrent and battery/system
> > under voltage conditions.
> >
> > Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@xxxxxxxxxxxxxxxx>
> > ---
> >   .../devicetree/bindings/hwmon/qcom,bcl-hwmon.yaml  | 128 +++++++++++++++++++++
> >   1 file changed, 128 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/qcom,bcl-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/qcom,bcl-hwmon.yaml
> > new file mode 100644
> > index 000000000000..a0e8eaf13eec
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/qcom,bcl-hwmon.yaml
> > @@ -0,0 +1,128 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/hwmon/qcom,bcl-hwmon.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SPMI PMIC Battery Current Limiting (BCL) Hardware Monitor
> > +
> > +maintainers:
> > +  - Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@xxxxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  SPMI PMIC Battery Current Limiting (BCL) hardware provides monitoring and
> > +  alarm functionality for battery overcurrent and battery or system under
> > +  voltage conditions. It monitors battery voltage and current, and
> > +  can trigger interrupts when configurable thresholds are exceeded.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - description: v1 based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pm7250b-bcl
> > +              - qcom,pm8250b-bcl
> > +          - const: qcom,bcl-v1
> > +
> > +      - description: v2 based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pm8350b-bcl
> > +              - qcom,pm8350c-bcl
> > +          - const: qcom,bcl-v2
> > +
> > +      - description: v3 bmx based BCL
> You need to explain your abbreviations. What is BMX? What is WB (and
> yep, they should be capital letters). What is the difference between all
> three of them?
ACK, Will update in next revision
> > +        items:
> > +          - enum:
> > +              - qcom,pm8550b-bcl
> > +              - qcom,pm7550ba-bcl
> > +          - const: qcom,bcl-v3-bmx
> > +
> > +      - description: v3 core based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pm8550-bc0l
> > +              - qcom,pm7550-bcl
> > +          - const: qcom,bcl-v3-core
> > +
> > +      - description: v3 wb based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pmw5100-bcl
> > +          - const: qcom,bcl-v3-wb
> > +
> > +      - description: v4 bmx based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pmih010-bcl
> > +          - const: qcom,bcl-v4-bmx
> > +
> > +      - description: v4 bmx with different scale based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pmv010-bcl
> > +          - const: qcom,bcl-v4-pmv010
> > +
> > +      - description: v4 core based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pmh010-bcl
> > +          - const: qcom,bcl-v4-core
> > +
> > +      - description: v4 wb based BCL
> > +        items:
> > +          - enum:
> > +              - qcom,pmw6100-bcl
> > +          - const: qcom,bcl-v4-wb
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: BCL base address in the SPMI PMIC register map
> > +
> > +  interrupts:
> > +    minItems: 2
> > +    maxItems: 2
> > +    description:
> > +      BCL alarm interrupts for different threshold levels
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: bcl-max-min
> > +      - const: bcl-critical
> > +
> > +  overcurrent-thresholds-milliamp:
> > +    description:
> > +      Current thresholds in milliamperes for the two configurable current
> > +      alarm levels (max and critical). These values are used to override
> > +      default thresholds if a platform has different battery ocp specification.
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > +    minItems: 2
> > +    maxItems: 2
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    pmic {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        bcl@1d00 {
> > +            compatible = "qcom,pm7250b-bcl", "qcom,bcl-v1";
> > +            reg = <0x1d00>;
> > +            interrupts = <0x2 0x1d 0x0 IRQ_TYPE_EDGE_RISING>,
> > +                         <0x2 0x1d 0x1 IRQ_TYPE_EDGE_RISING>;
> > +            interrupt-names = "bcl-max-min",
> > +                              "bcl-critical";
> > +            overcurrent-thresholds-milliamp = <5500 6000>;
> How is going to be used by the power supply subsystem?

There is no any interaction with power supply subsystem for bcl alarms

Thanks,

Manaf

> > +        };
> > +    };
> >
> > --
> > 2.43.0