Re: [PATCH 3/3] media: i2c: imx283: Fix handling of unsupported mbus codes
From: Kieran Bingham
Date: Fri Feb 13 2026 - 08:29:08 EST
Quoting Kieran Bingham (2025-09-18 14:27:53)
> From: Stefan Klug <stefan.klug@xxxxxxxxxxxxxxxx>
>
> When the code requested by imx283_set_pad_format() is not supported, a
> kernel exception occurs due to dereferencing the mode variable which is
> null. Fix that by correcting the code to a valid value before getting
> the mode table.
>
> While at it, remove the cases for the other unsupported codes in
> get_mode_table.
>
Here too, this fixes the original submission:
Cc: stable@xxxxxxxxxxxxxxx # v6.10-rc1-70-gccb4eb4496fa
Fixes: ccb4eb4496fa ("media: i2c: Add imx283 camera sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
Tested-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> Signed-off-by: Stefan Klug <stefan.klug@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx283.c | 24 ++++++++++++++++--------
> 1 file changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c
> index 582975ac849f..48a92bc8e6f1 100644
> --- a/drivers/media/i2c/imx283.c
> +++ b/drivers/media/i2c/imx283.c
> @@ -576,23 +576,31 @@ static inline struct imx283 *to_imx283(struct v4l2_subdev *sd)
> return container_of_const(sd, struct imx283, sd);
> }
>
> +static inline int get_format_code(unsigned int code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(imx283_mbus_codes); i++)
> + if (imx283_mbus_codes[i] == code)
> + break;
> +
> + if (i >= ARRAY_SIZE(imx283_mbus_codes))
> + i = 0;
> +
> + return imx283_mbus_codes[i];
> +}
> +
> static inline void get_mode_table(unsigned int code,
> const struct imx283_mode **mode_list,
> unsigned int *num_modes)
> {
> switch (code) {
> case MEDIA_BUS_FMT_SRGGB12_1X12:
> - case MEDIA_BUS_FMT_SGRBG12_1X12:
> - case MEDIA_BUS_FMT_SGBRG12_1X12:
> - case MEDIA_BUS_FMT_SBGGR12_1X12:
> *mode_list = supported_modes_12bit;
> *num_modes = ARRAY_SIZE(supported_modes_12bit);
> break;
>
> case MEDIA_BUS_FMT_SRGGB10_1X10:
> - case MEDIA_BUS_FMT_SGRBG10_1X10:
> - case MEDIA_BUS_FMT_SGBRG10_1X10:
> - case MEDIA_BUS_FMT_SBGGR10_1X10:
> *mode_list = supported_modes_10bit;
> *num_modes = ARRAY_SIZE(supported_modes_10bit);
> break;
> @@ -973,6 +981,8 @@ static int imx283_set_pad_format(struct v4l2_subdev *sd,
> const struct imx283_mode *mode_list;
> unsigned int num_modes;
>
> + fmt->format.code = get_format_code(fmt->format.code);
> +
> get_mode_table(fmt->format.code, &mode_list, &num_modes);
>
> mode = v4l2_find_nearest_size(mode_list, num_modes, width, height,
> @@ -1371,8 +1381,6 @@ static int imx283_init_controls(struct imx283 *imx283)
>
> imx283->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx283_ctrl_ops, V4L2_CID_VFLIP,
> 0, 1, 1, 0);
> - if (imx283->vflip)
> - imx283->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
>
> v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx283_ctrl_ops,
> V4L2_CID_TEST_PATTERN,
> --
> 2.50.1
>