[PATCH 2/2] ARM: dts: stm32: fix misalignments in nodes of stm32mp131

[Amelie Delaunay]

Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
---
 arch/arm/boot/dts/st/stm32mp131.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b9657ff91c23..93d52fbd0de2 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1129,7 +1129,7 @@ usart1: serial@4c000000 {
 				resets = <&rcc USART1_R>;
 				wakeup-source;
 				dmas = <&dmamux1 41 0x400 0x5>,
-				<&dmamux1 42 0x400 0x1>;
+				       <&dmamux1 42 0x400 0x1>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 16>;
 				status = "disabled";
@@ -1143,7 +1143,7 @@ usart2: serial@4c001000 {
 				resets = <&rcc USART2_R>;
 				wakeup-source;
 				dmas = <&dmamux1 43 0x400 0x5>,
-				<&dmamux1 44 0x400 0x1>;
+				       <&dmamux1 44 0x400 0x1>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 17>;
 				status = "disabled";
@@ -1155,7 +1155,7 @@ i2s4: audio-controller@4c002000 {
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&dmamux1 83 0x400 0x01>,
-				<&dmamux1 84 0x400 0x01>;
+				       <&dmamux1 84 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 13>;
 				status = "disabled";
@@ -1348,9 +1348,9 @@ timers15: timer@4c00a000 {
 				clocks = <&rcc TIM15_K>;
 				clock-names = "int";
 				dmas = <&dmamux1 105 0x400 0x1>,
-				<&dmamux1 106 0x400 0x1>,
-				<&dmamux1 107 0x400 0x1>,
-				<&dmamux1 108 0x400 0x1>;
+				       <&dmamux1 106 0x400 0x1>,
+				       <&dmamux1 107 0x400 0x1>,
+				       <&dmamux1 108 0x400 0x1>;
 				dma-names = "ch1", "up", "trig", "com";
 				access-controllers = <&etzpc 26>;
 				status = "disabled";
@@ -1383,7 +1383,7 @@ timers16: timer@4c00b000 {
 				clocks = <&rcc TIM16_K>;
 				clock-names = "int";
 				dmas = <&dmamux1 109 0x400 0x1>,
-				<&dmamux1 110 0x400 0x1>;
+				       <&dmamux1 110 0x400 0x1>;
 				dma-names = "ch1", "up";
 				access-controllers = <&etzpc 27>;
 				status = "disabled";

-- 
2.43.0