[PATCH 1/2] ARM: dts: stm32: fix misalignments in nodes of stm32mp151

[Amelie Delaunay]

Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
---
 arch/arm/boot/dts/st/stm32mp151.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index b1b568dfd126..fd58bb700f6c 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -1083,7 +1083,7 @@ usart6: serial@44003000 {
 				clocks = <&rcc USART6_K>;
 				wakeup-source;
 				dmas = <&dmamux1 71 0x400 0x15>,
-				<&dmamux1 72 0x400 0x11>;
+				       <&dmamux1 72 0x400 0x11>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 51>;
 				status = "disabled";
@@ -1095,7 +1095,7 @@ i2s1: audio-controller@44004000 {
 				reg = <0x44004000 0x400>;
 				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&dmamux1 37 0x400 0x01>,
-				<&dmamux1 38 0x400 0x01>;
+				       <&dmamux1 38 0x400 0x01>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 52>;
 				status = "disabled";
@@ -1110,7 +1110,7 @@ spi1: spi@44004000 {
 				clocks = <&rcc SPI1_K>;
 				resets = <&rcc SPI1_R>;
 				dmas = <&dmamux1 37 0x400 0x05>,
-				<&dmamux1 38 0x400 0x05>;
+				       <&dmamux1 38 0x400 0x05>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 52>;
 				status = "disabled";
@@ -1125,7 +1125,7 @@ spi4: spi@44005000 {
 				clocks = <&rcc SPI4_K>;
 				resets = <&rcc SPI4_R>;
 				dmas = <&dmamux1 83 0x400 0x05>,
-				<&dmamux1 84 0x400 0x05>;
+				       <&dmamux1 84 0x400 0x05>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 53>;
 				status = "disabled";
@@ -1176,7 +1176,7 @@ timers16: timer@44007000 {
 				clocks = <&rcc TIM16_K>;
 				clock-names = "int";
 				dmas = <&dmamux1 109 0x400 0x1>,
-				<&dmamux1 110 0x400 0x1>;
+				       <&dmamux1 110 0x400 0x1>;
 				dma-names = "ch1", "up";
 				access-controllers = <&etzpc 55>;
 				status = "disabled";
@@ -1209,7 +1209,7 @@ timers17: timer@44008000 {
 				clocks = <&rcc TIM17_K>;
 				clock-names = "int";
 				dmas = <&dmamux1 111 0x400 0x1>,
-				<&dmamux1 112 0x400 0x1>;
+				       <&dmamux1 112 0x400 0x1>;
 				dma-names = "ch1", "up";
 				access-controllers = <&etzpc 56>;
 				status = "disabled";
@@ -1241,7 +1241,7 @@ spi5: spi@44009000 {
 				clocks = <&rcc SPI5_K>;
 				resets = <&rcc SPI5_R>;
 				dmas = <&dmamux1 85 0x400 0x05>,
-				<&dmamux1 86 0x400 0x05>;
+				       <&dmamux1 86 0x400 0x05>;
 				dma-names = "rx", "tx";
 				access-controllers = <&etzpc 57>;
 				status = "disabled";

-- 
2.43.0