Re: [PATCH v5 04/12] coresight: etm4x: exclude ss_status from drvdata->config

From: Yeoreum Yun

Date: Thu Apr 16 2026 - 02:56:16 EST


Hi Jie,

>
>
> On 4/16/2026 12:55 AM, Yeoreum Yun wrote:
> > The purpose of TRCSSCSRn register is to show status of
> > the corresponding Single-shot Comparator Control and input supports.
> > That means writable field's purpose for reset or restore from idle status
> > not for configuration.
> >
> > Therefore, exclude ss_status from drvdata->config, move it to etm4x_caps
> > and rename it to ss_smp.
> >
> > This includes remove TRCSSCRn from configurable item and
> > remove saving in etm4_disable_hw().
> >
> > Signed-off-by: Yeoreum Yun <yeoreum.yun@xxxxxxx>
> > ---
> > .../hwtracing/coresight/coresight-etm4x-cfg.c | 1 -
> > .../coresight/coresight-etm4x-core.c | 19 ++++++-------------
> > .../coresight/coresight-etm4x-sysfs.c | 7 ++-----
> > drivers/hwtracing/coresight/coresight-etm4x.h | 7 ++++++-
> > 4 files changed, 14 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
> > index c302072b293a..d14d7c8a23e5 100644
> > --- a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
> > +++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
> > @@ -86,7 +86,6 @@ static int etm4_cfg_map_reg_offset(struct etmv4_drvdata *drvdata,
> > off_mask = (offset & GENMASK(11, 5));
> > do {
> > CHECKREGIDX(TRCSSCCRn(0), ss_ctrl, idx, off_mask);
> > - CHECKREGIDX(TRCSSCSRn(0), ss_status, idx, off_mask);
> > CHECKREGIDX(TRCSSPCICRn(0), ss_pe_cmp, idx, off_mask);
> > } while (0);
> > } else if ((offset >= TRCCIDCVRn(0)) && (offset <= TRCVMIDCVRn(7))) {
> > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > index b2b092a76eb5..f55338a4989d 100644
> > --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> > @@ -91,7 +91,7 @@ static bool etm4x_sspcicrn_present(struct etmv4_drvdata *drvdata, int n)
> > const struct etmv4_caps *caps = &drvdata->caps;
> > return (n < caps->nr_ss_cmp) && caps->nr_pe_cmp &&
> > - (drvdata->config.ss_status[n] & TRCSSCSRn_PC);
> > + (caps->ss_cmp[n] & TRCSSCSRn_PC);
> > }
> > u64 etm4x_sysreg_read(u32 offset, bool _relaxed, bool _64bit)
> > @@ -573,11 +573,9 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
> > etm4x_relaxed_write32(csa, config->res_ctrl[i], TRCRSCTLRn(i));
> > for (i = 0; i < caps->nr_ss_cmp; i++) {
> > - /* always clear status bit on restart if using single-shot */
> > - if (config->ss_ctrl[i] || config->ss_pe_cmp[i])
> > - config->ss_status[i] &= ~TRCSSCSRn_STATUS;
> > etm4x_relaxed_write32(csa, config->ss_ctrl[i], TRCSSCCRn(i));
> > - etm4x_relaxed_write32(csa, config->ss_status[i], TRCSSCSRn(i));
> > + /* always clear status and pending bits on restart if using single-shot */
> > + etm4x_relaxed_write32(csa, 0x0, TRCSSCSRn(i));
> > if (etm4x_sspcicrn_present(drvdata, i))
> > etm4x_relaxed_write32(csa, config->ss_pe_cmp[i], TRCSSPCICRn(i));
> > }
> > @@ -1055,12 +1053,6 @@ static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
> > etm4_disable_trace_unit(drvdata);
> > - /* read the status of the single shot comparators */
> > - for (i = 0; i < caps->nr_ss_cmp; i++) {
> > - config->ss_status[i] =
> > - etm4x_relaxed_read32(csa, TRCSSCSRn(i));
> > - }
> > -
> > /* read back the current counter values */
> > for (i = 0; i < caps->nr_cntr; i++) {
> > config->cntr_val[i] =
> > @@ -1503,8 +1495,9 @@ static void etm4_init_arch_data(void *info)
> > */
> > caps->nr_ss_cmp = FIELD_GET(TRCIDR4_NUMSSCC_MASK, etmidr4);
> > for (i = 0; i < caps->nr_ss_cmp; i++) {
> > - drvdata->config.ss_status[i] =
> > - etm4x_relaxed_read32(csa, TRCSSCSRn(i));
> > + caps->ss_cmp[i] = etm4x_relaxed_read32(csa, TRCSSCSRn(i));
> > + caps->ss_cmp[i] &= (TRCSSCSRn_PC | TRCSSCSRn_DV |
> > + TRCSSCSRn_DA | TRCSSCSRn_INST);
>
> Just re-go through this patch and had a question here:
>
> I’m not sure whether this new change should be documented in the ABI, given
> that the TRCSSCSRn_STATUS bit is masked. In my opinion, this change breaks
> the existing ABI description.
>
> Description from the ABI document:
>
> What: /sys/bus/coresight/devices/etm<N>/sshot_status
> Date: December 2019
> KernelVersion: 5.5
> Contact: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Description: (Read) Print the current value of the selected single
> shot status register.

But, as I mentioned another thread:
- https://lore.kernel.org/all/ad5yV2FoNbGGLE6R@xxxxxxxxxxxxxxx/

Till now, sysfs doesn't show the *current value* of the single shot
state since the config->ss_status is updated enabled/disabled sysfs
session. an I think once the session is disabled, other status bits
(currently STATUS and PENDING bits) don't have any meaning.

I think it's enough to change the doc's Description for this.

Any thought?

--
Sincerely,
Yeoreum Yun