Re: [PATCH v5 1/4] dt-bindings: pwm: allwinner: add h616 pwm compatible

[Krzysztof Kozlowski]

On 16/04/2026 15:14, Richard Genoud wrote:
> Allwinner H616 PWM block is quite different from the A10 or H6, but at
> the end, it uses the same clocks as the H6; so the sun4i pwm binding can
> be used.
> It has 6 channels than can generate PWM waveforms.
> If the bypass is enabled (one bypass per channel) the output is no more
> a PWM waveform, but a clock that can (and is) used as input for other
> devices, like the AC300 PHY.
> 
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> Tested-by: John Stultz <jstultz@xxxxxxxxxx>


Please drop or help me understand how one can test bindings on the
device? Build process tools are not testing.

Don't blindly copy tags from cover letter.

Best regards,
Krzysztof