[PATCH 25/40] arm64: dts: rockchip: Add frl-enable-gpios to rk3588-roc-rt

[Cristian Ciocaltea]

The board exposes the GPIO4_B0 and GPIO4_B1 lines to control the voltage
bias on the data lines for the HDMI0 and HDMI1 ports.  These lines must
be asserted when operating in HDMI 2.1 FRL mode and deasserted for HDMI
1.4/2.0 TMDS mode.

Wire up both HDMI ports to their respective GPIO lines using the
frl-enable-gpios property to allow adjusting the bias when transitioning
between TMDS and FRL operating modes.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
index 2d6fed2a84a3..f2ab82b2ab6a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
@@ -325,6 +325,9 @@ &gpu {
 };
 
 &hdmi0 {
+	pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
+		     &hdmim0_tx0_scl &hdmim0_tx0_sda &hdmi0_frl_en>;
+	frl-enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -345,6 +348,9 @@ &hdmi0_sound {
 };
 
 &hdmi1 {
+	pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd
+		     &hdmim1_tx1_scl &hdmim1_tx1_sda &hdmi1_frl_en>;
+	frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -583,6 +589,16 @@ led_pins: led-pins {
 		};
 	};
 
+	hdmi {
+		hdmi0_frl_en: hdmi0-frl-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hdmi1_frl_en: hdmi1-frl-en {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	hym8563 {
 		hym8563_int: hym8563-int {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;

-- 
2.53.0