[PATCH v1 4/5] media: lm3560: convert to use OF bindings
From: Svyatoslav Ryhel
Date: Fri Apr 17 2026 - 07:48:04 EST
Since there are no users of this driver via platform data, remove platform
data and switch to using device tree bindings.
Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
---
drivers/media/i2c/lm3560.c | 118 +++++++++++++++++++++++++++----------
include/media/i2c/lm3560.h | 15 -----
2 files changed, 87 insertions(+), 46 deletions(-)
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index bee1681a1603..dab2da87331d 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -14,7 +14,9 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
@@ -45,17 +47,19 @@ enum led_enable {
* struct lm3560_flash
*
* @dev: pointer to &struct device
- * @pdata: platform data
* @regmap: reg. map for i2c
* @hwen_gpio: line connected to hwen pin
* @lock: muxtex for serial access.
* @led_mode: V4L2 LED mode
* @ctrls_led: V4L2 controls
* @subdev_led: V4L2 subdev
+ * @peak: peak current
+ * @max_flash_timeout: flash timeout
+ * @max_flash_brt: flash mode led brightness
+ * @max_torch_brt: torch mode led brightness
*/
struct lm3560_flash {
struct device *dev;
- struct lm3560_platform_data *pdata;
struct regmap *regmap;
struct gpio_desc *hwen_gpio;
struct mutex lock;
@@ -63,6 +67,12 @@ struct lm3560_flash {
enum v4l2_flash_led_mode led_mode;
struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
struct v4l2_subdev subdev_led[LM3560_LED_MAX];
+
+ enum lm3560_peak_current peak;
+ u32 max_flash_timeout;
+
+ u32 max_flash_brt[LM3560_LED_MAX];
+ u32 max_torch_brt[LM3560_LED_MAX];
};
#define to_lm3560_flash(_ctrl, _no) \
@@ -283,8 +293,8 @@ static int lm3560_init_controls(struct lm3560_flash *flash,
enum lm3560_led_id led_no)
{
struct v4l2_ctrl *fault;
- u32 max_flash_brt = flash->pdata->max_flash_brt[led_no];
- u32 max_torch_brt = flash->pdata->max_torch_brt[led_no];
+ u32 max_flash_brt = flash->max_flash_brt[led_no];
+ u32 max_torch_brt = flash->max_torch_brt[led_no];
struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no];
const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
@@ -309,9 +319,9 @@ static int lm3560_init_controls(struct lm3560_flash *flash,
/* flash strobe timeout */
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
LM3560_FLASH_TOUT_MIN,
- flash->pdata->max_flash_timeout,
+ flash->max_flash_timeout,
LM3560_FLASH_TOUT_STEP,
- flash->pdata->max_flash_timeout);
+ flash->max_flash_timeout);
/* flash brt */
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
@@ -351,15 +361,17 @@ static const struct regmap_config lm3560_regmap = {
};
static int lm3560_subdev_init(struct lm3560_flash *flash,
- enum lm3560_led_id led_no, char *led_name)
+ enum lm3560_led_id led_no,
+ struct fwnode_handle *fwnode)
{
struct i2c_client *client = to_i2c_client(flash->dev);
int rval;
v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops);
flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- strscpy(flash->subdev_led[led_no].name, led_name,
- sizeof(flash->subdev_led[led_no].name));
+ snprintf(flash->subdev_led[led_no].name,
+ sizeof(flash->subdev_led[led_no].name),
+ "lm3560-led%d", led_no);
rval = lm3560_init_controls(flash, led_no);
if (rval)
goto err_out;
@@ -367,6 +379,7 @@ static int lm3560_subdev_init(struct lm3560_flash *flash,
if (rval < 0)
goto err_out;
flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
+ flash->subdev_led[led_no].fwnode = fwnode;
rval = v4l2_async_register_subdev(&flash->subdev_led[led_no]);
if (rval < 0)
@@ -388,7 +401,7 @@ static int lm3560_init_device(struct lm3560_flash *flash)
/* set peak current */
rval = regmap_update_bits(flash->regmap,
- REG_FLASH_TOUT, 0x60, flash->pdata->peak);
+ REG_FLASH_TOUT, 0x60, flash->peak);
if (rval < 0)
return rval;
/* output disable */
@@ -401,10 +414,64 @@ static int lm3560_init_device(struct lm3560_flash *flash)
return rval;
}
+static int lm3560_of_probe(struct lm3560_flash *flash)
+{
+ struct fwnode_handle *node;
+ u32 peak_ua;
+ int rval, reg;
+
+ flash->peak = LM3560_PEAK_3600mA;
+ rval = device_property_read_u32(flash->dev,
+ "ti,peak-current-microamp", &peak_ua);
+ if (!rval) {
+ switch (peak_ua) {
+ case 16000000:
+ flash->peak = LM3560_PEAK_1600mA;
+ break;
+ case 23000000:
+ flash->peak = LM3560_PEAK_2300mA;
+ break;
+ case 30000000:
+ flash->peak = LM3560_PEAK_3000mA;
+ break;
+ case 36000000:
+ flash->peak = LM3560_PEAK_3600mA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ flash->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+ device_property_read_u32(flash->dev, "ti,max-flash-timeout-ms",
+ &flash->max_flash_timeout);
+
+ device_for_each_child_node(flash->dev, node) {
+ fwnode_property_read_u32(node, "reg", ®);
+
+ if (reg == LM3560_LED0 || reg == LM3560_LED1) {
+ flash->max_flash_brt[reg] = LM3560_FLASH_BRT_MAX;
+ fwnode_property_read_u32(node, "ti,max-flash-current-microamp",
+ &flash->max_flash_brt[reg]);
+
+ flash->max_torch_brt[reg] = LM3560_TORCH_BRT_MAX;
+ fwnode_property_read_u32(node, "ti,max-torch-current-microamp",
+ &flash->max_torch_brt[reg]);
+
+ rval = lm3560_subdev_init(flash, reg, node);
+ if (rval < 0)
+ return dev_err_probe(flash->dev, rval,
+ "failed to register led%d\n",
+ reg);
+ }
+ }
+
+ return 0;
+}
+
static int lm3560_probe(struct i2c_client *client)
{
struct lm3560_flash *flash;
- struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev);
int rval;
flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
@@ -417,21 +484,6 @@ static int lm3560_probe(struct i2c_client *client)
return rval;
}
- /* if there is no platform data, use chip default value */
- if (pdata == NULL) {
- pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
- if (pdata == NULL)
- return -ENODEV;
- pdata->peak = LM3560_PEAK_3600mA;
- pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
- /* led 1 */
- pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
- pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
- /* led 2 */
- pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
- pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
- }
- flash->pdata = pdata;
flash->dev = &client->dev;
mutex_init(&flash->lock);
@@ -446,11 +498,7 @@ static int lm3560_probe(struct i2c_client *client)
return dev_err_probe(&client->dev, rval,
"failed to enable regulator\n");
- rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
- if (rval < 0)
- return rval;
-
- rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
+ rval = lm3560_of_probe(flash);
if (rval < 0)
return rval;
@@ -477,6 +525,13 @@ static void lm3560_remove(struct i2c_client *client)
gpiod_set_value_cansleep(flash->hwen_gpio, 0);
}
+static const struct of_device_id lm3560_of_match[] = {
+ { .compatible = "ti,lm3559" },
+ { .compatible = "ti,lm3560" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3560_of_match);
+
static const struct i2c_device_id lm3560_id_table[] = {
{ LM3559_NAME },
{ LM3560_NAME },
@@ -489,6 +544,7 @@ static struct i2c_driver lm3560_i2c_driver = {
.driver = {
.name = LM3560_NAME,
.pm = NULL,
+ .of_match_table = lm3560_of_match,
},
.probe = lm3560_probe,
.remove = lm3560_remove,
diff --git a/include/media/i2c/lm3560.h b/include/media/i2c/lm3560.h
index 770d8c72c94a..b56c1ff8fd49 100644
--- a/include/media/i2c/lm3560.h
+++ b/include/media/i2c/lm3560.h
@@ -66,19 +66,4 @@ enum lm3560_peak_current {
LM3560_PEAK_3600mA = 0x60
};
-/* struct lm3560_platform_data
- *
- * @peak : peak current
- * @max_flash_timeout: flash timeout
- * @max_flash_brt: flash mode led brightness
- * @max_torch_brt: torch mode led brightness
- */
-struct lm3560_platform_data {
- enum lm3560_peak_current peak;
-
- u32 max_flash_timeout;
- u32 max_flash_brt[LM3560_LED_MAX];
- u32 max_torch_brt[LM3560_LED_MAX];
-};
-
#endif /* __LM3560_H__ */
--
2.51.0