Re: [PATCH for drm-misc-fixes v4 2/4] drm/hisilicon/hibmc: fix no showing when no connectors connected
From: Thomas Zimmermann
Date: Mon Apr 20 2026 - 05:33:06 EST
Hi
Am 20.04.26 um 10:40 schrieb Yongbang Shi:
[...]
From the patch you contributed,，I understand that you are using an
RH1288H V3 server. I have confirmed with our chief hardware engineer
that the board design for this series of servers does not connect the
BMC chip’s DDC I2C to the VGA port.
Thanks a lot for double-checking. That's the info I was missing. I suggest to build a workaround into the driver to filter out these boards and always return 'connected' on them. IIUC even with these new callbacks, the driver would not work as expected.
[1]https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c?h=v6.12.82#L60
[2]https://lore.kernel.org/all/20250320101455.2538835-10-shiyongbang@xxxxxxxxxx/
According to our BMC chip specifications, both VGA and DisplayPortSigned-off-by: Lin He <helin52@xxxxxxxxxx>[...]
Signed-off-by: Yongbang Shi <shiyongbang@xxxxxxxxxx>
---
+static int hibmc_vdac_detect(struct drm_connector *connector,This will break user-space compositors if DP and VGA are connected at
+ struct drm_modeset_acquire_ctx *ctx,
+ bool force)
+{
+ struct hibmc_drm_private *priv = to_hibmc_drm_private(connector-
dev);+ struct hibmc_vdac *vdac = to_hibmc_vdac(connector);
+
+ vdac->phys_state = drm_connector_helper_detect_from_ddc(connector,
+ ctx, force);
+
+ /* If the DP connectors are disconnected, the hibmc_vdac_detect
function
+ * must return a connected state to ensure KVM display
functionality.
+ * Additionally, for previous-generation products that may lack
hardware
+ * link support and thus cannot detect the monitor,
hibmc_vdac_detect
+ * should also return a connected state.
+ */
+ if (priv->dp.phys_state != connector_status_connected)
+ return connector_status_connected;
+
+ return vdac->phys_state;
the same time. I know, because we had such logic in ast and mgag200.
Today's compositors expect a single encoder-connector pair on each CRTC.
That's what most contemporary hardware provides. But the server
chipsets usually come with one a single CRTC and multiple connectors
attached to it. Compositors fail to configure that. When we had this in
ast and mgag200, Gnome would display garbage to the screen and mode-
setting would fail. The bug report is at [1].
In ast and mgag200, only one connector would be installed on a single
system. So we could avoid the problem. It looks like that this is not an
option with hibmc. VGA always seems to be present and DP seems optional.
I would advice to only report one of the connectors as 'connected' if
both are installed on a system.
outputs are required, but only one connection is allowed at a time,
which seems impractical.
That's true.
Yet it needs support form user space to make it work. It's not a kernel problem.
Do you have any additional details regarding this issue with the Mutter
synthesizer? For example, steps to reproduce the issue or more specific
alert logs. I looked at the issue you submitted to Mutter, which
describes the phenomenon as "a warning that the configuration is
incompatible", Could you clarify what this warning specifically refers
to—is it a message displayed on the screen, or is it a specific entry in
the logs?
In ast, we used to have at least one connector for the physical output and another connector for the BMC/KVM. Running Gnome and opening the Settings app did not work correctly. One issue is that display configuration could not be changed in Gnome. That's the reported error of changes not being applicable.
IIRC I've also seen distorted output if I really pushed it. But maybe that has meanwhile been mitigated.
I've been told that other compositors also don't support this scenario well.
I think you'd run into this case once someone connects the DP and VGA at the same time.
Over the next few days, we will focus on testing relevant scenarios
while setting both the VGA and DP ports to `connected` to see if we
encounter similar issues or warnings.
You also need to increment the connector's epoch_counter if the physicalOnly one option is displayed here, but it does not meet our specifications.
status changed. Doing this will trigger DRM clients to re-read the
connector state and reconfigure display.
Something like that
dp_detect()
{
dp.phys_state = detect_from_hw()
if (dp.phys_state changed)
++epoch_counter
return connected
}
vdac_detect()
{
if (dp.phys_state == connected)
return disconnected
vdac.phys_state = detect_from_hw()I looked at the implementations of `detect_ctx` in ATS and MGAG200;
if (vdac.phys_state changed)
++epoch_counter
return connected
}
This handles the KVM in each connector's helper. The ast driver is
probably the best reference for the current logic. See [2].
these implementations generally always return `connected`.
If my analysis is correct, the logic should be as follows:
- If the `detect_ctx` function implemented by each vendor returns the
actual hardware state, there is no need to modify `epoch_counter`;
the DRM framework will execute `epoch_counter++` based on the return
value of the `detect_ctx` function;
- If the `detect_ctx` function in a vendor’s code always returns
`connected`, then `epoch_counter++` must be performed within the
vendor’s `detect_ctx` function; the implementations in ATS and
MGAG200 appear to be like this;
Exactly. In ast/mgag200, we had the case that the VGA got disconnected. We'd still return connected, as the BMC/KVM was present. We now had to reconfigure for the KVM. That requires modifying epoch_counter. You can see at [1] that we only increment if the physical status changes. [1] Same goes for re-connecting the VGA display.
[1] https://elixir.bootlin.com/linux/v7.0/source/drivers/gpu/drm/ast/ast_vga.c#L56
Here is the pseudocode for our current logic. This logic is indeed a bit
hard to grasp, so I've added some more comments; it might be a bit
clearer than the patch:
dp_detect()
{
dp.phys_state = detect_from_hw()
/* epoch_counter update by drm framework */
return dp.phys_state;
}
vdac_detect()
{
/*
* Scene 1: The driver runs on an older version of the BMC chip,
* and `dp.phys_state` is initialized to 0. To maintain
* consistency with the previous hibmc-drm driver
* logic, always return `connected`.
* Scene 2: The driver runs on an new version of the BMC chip,
* and `dp.phys_state` is real status, witch is real
* `disconnect`. In this scenario, we must ensure that
* the VGA is `connected` to guarantee that the KVM
* displays properly.
*/
if (dp.phys_state != connected)
return connected;
/*
* DP is connected: This driver is definitely running on the
* latest BMC chip, and the DDC I2C is definitely
* connected to the VGA port, so we can confirm whether
* the VGA is present by reading the EDID directly via
* I2C.
*/
vdac.phys_state = detect_from_hw()
/* epoch_counter update by drm framework */
return vdac.phys_state;
Let's assume the DP is disconnected. If VGA's physical status goes from connected to disconnected, user space will not know that it needs to reconfigure for the BMC. (or vice versa)
To give you some context from earlier discussions around the other drivers: We had the scenario that the user boots up without a connected VGA display. This would enable the BMC, which sometimes picks a large resolution; say >2k per dimension. That is problematic for KVM over networks. And if the user now plugs in a physical VGA display, they would be stuck with the large resolution on the framebuffer console. Maybe the VGA display wouldn't even support such a high-res mode. So we set the default for the BMC to 1024x768. That is well manageable for all of today's VGA displays and does not impose too much overhead for KVM over networks. As a drawback, it's a bit small on monitors and not nice to look at. So we modify epoch_counter whenever the physical status changes. This triggers compositors to reconfigure their screens for the new display.
Best regards
Thomas
}
Sorry for the delay; it took me a little while to figure out how best to
explain this bug and our current implementation.
Thanks,
Yongbang.
[1] https://gitlab.gnome.org/GNOME/mutter/-/issues/3858
[2] https://elixir.bootlin.com/linux/v7.0/source/drivers/gpu/drm/ast/
ast_vga.c#L47
Best regards
Thomas
+}
+
static const struct drm_connector_helper_funcs
hibmc_connector_helper_funcs = {
.get_modes = hibmc_connector_get_modes,
- .detect_ctx = drm_connector_helper_detect_from_ddc,
+ .detect_ctx = hibmc_vdac_detect,
};
static const struct drm_connector_funcs hibmc_connector_funcs = {
@@ -130,6 +145,8 @@ int hibmc_vdac_init(struct hibmc_drm_private *priv)
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT;
+ vdac->phys_state = connector_status_connected;
+
return 0;
err:
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)