[PATCH v3 00/10] thermal: samsung: Add support for Google GS101 TMU

[Tudor Ambarus]

Add support for the Thermal Management Unit (TMU) on the Google GS101
SoC.

The GS101 TMU implementation utilizes a hybrid architecture where
management is shared between the kernel and the Alive Clock and
Power Manager (ACPM) firmware. This hybrid ACPM TMU architecture is 
also present on other Samsung Exynos SoCs (e.g., AutoV920, Exynos850).

Dependencies
============

- firmware patches 2, 3, 4, 5, 6: required by the thermal driver
  (patch 7).
- bindings (patch 1): required for DTS validation.
- thermal driver patch 7: required by defconfig (patch 10) - logical
dependency. 

Given the thermal driver is a new addition, I suggest everything to go
through the Samsung SoC tree, with ACKs from the Thermal maintainers.
The MFD and clk maintainers are included because of the cleanup patches
(3 and 4). ACPM updated some structures that the mfd and clk client
drivers are using, so these patches shall naturally go via the Samsung
SoC tree.

If the Thermal maintainers prefer to take the bindings and the thermal
driver patches via their tree we'll need:
- an immutable branch containing the firmware patches (2, 3, 4, 5, 6)
  from the Samsung SoC tree to serve as a base for the thermal driver.
- an immutable branch containing the bindings and the thermal driver
  from the thermal tree to serve as a base for the dts and defconfig.

Architecture Overview
=====================

The hardware supports two parallel control paths. For this
implementation, responsibilities are split as follows:

1. Kernel Responsibility:
- maintain direct memory-mapped access to the interrupt pending
  (INTPEND) registers to identify thermal events.
- map physical hardware interrupts to logical thermal zones.
- coordinate functional operations through the ACPM IPC protocol.

2. Firmware Responsibility (ACPM):
- handle sensor initialization.
- manage thermal thresholds configuration.
- perform temperature acquisition and expose data via IPC.

Sensor Mapping (One-to-Many)
============================

The SoC contains multiple physical temperature sensors, but the ACPM
firmware abstracts these into logical groups (Clusters) for reporting:

- ACPM Sensor 0 (Big Cluster): Aggregates physical sensors 0, 6, 7, 8, 9.
- ACPM Sensor 1 (Mid Cluster): Aggregates physical sensors 4, 5.
- ACPM Sensor 2 (Little Cluster): Aggregates physical sensors 1, 2.

The driver maps physical interrupt bits back to these logical parents.
When an interrupt fires, the driver checks the bitmask in the INTPEND
registers and updates the corresponding logical thermal zone.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
Changes in v3:
- thermal driver: use .set_trips() instead of .set_trip_point()
- new cleaning/prerequisite patches for firmware/acpm:
  - firmware: samsung: acpm: Make acpm_ops const and access via pointer
  - firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  - firmware: samsung: acpm: Consolidate transfer initialization helper
- firmware: acpm: TMU helpers - check return value from the firmware
- overall change: emphasize that the ACPM TMU hibrid approach applies to
  other Samsung SoCs as well (Exynos850, AutoV920).
- dts: drop active trip points, update trip point values
- collect R-b tags
- Link to v2: https://lore.kernel.org/r/20260119-acpm-tmu-v2-0-e02a834f04c6@xxxxxxxxxx

Changes in v2:
- architecture: switch from a syscon/MFD approach to a thermal-sensor
  node with a phandle to the ACPM interface
- bindings: address Krzysztof's feedback, drop redundencies,
  interrupts description.
- firmware: introduce devm_acpm_get_by_phandle() to standardize IPC
  handle acquisition.
- thermal driver: drop compatible's data and use the static data from
  the driver directly.
- defconfig, make EXYNOS_ACPM_THERMAL a module
- Link to v1: https://lore.kernel.org/r/20260114-acpm-tmu-v1-0-cfe56d93e90f@xxxxxxxxxx

---
Tudor Ambarus (10):
      dt-bindings: thermal: Add Google GS101 TMU
      firmware: samsung: acpm: Consolidate transfer initialization helper
      firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
      firmware: samsung: acpm: Make acpm_ops const and access via pointer
      firmware: samsung: acpm: Add TMU protocol support
      firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
      thermal: samsung: Add Exynos ACPM TMU driver GS101
      MAINTAINERS: Add entry for Samsung Exynos ACPM thermal driver
      arm64: dts: exynos: gs101: Add thermal management unit
      arm64: defconfig: enable Exynos ACPM thermal support

 .../bindings/thermal/google,gs101-tmu-top.yaml     |  68 +++
 MAINTAINERS                                        |   8 +
 arch/arm64/boot/dts/exynos/google/gs101-tmu.dtsi   | 136 ++++++
 arch/arm64/boot/dts/exynos/google/gs101.dtsi       |  18 +
 arch/arm64/configs/defconfig                       |   1 +
 drivers/clk/samsung/clk-acpm.c                     |   8 +-
 drivers/firmware/samsung/Makefile                  |   1 +
 drivers/firmware/samsung/exynos-acpm-dvfs.c        |  17 +-
 drivers/firmware/samsung/exynos-acpm-pmic.c        |  20 +-
 drivers/firmware/samsung/exynos-acpm-tmu.c         | 240 +++++++++
 drivers/firmware/samsung/exynos-acpm-tmu.h         |  28 ++
 drivers/firmware/samsung/exynos-acpm.c             |  94 +++-
 drivers/firmware/samsung/exynos-acpm.h             |   2 +
 drivers/mfd/sec-acpm.c                             |   6 +-
 drivers/thermal/samsung/Kconfig                    |  17 +
 drivers/thermal/samsung/Makefile                   |   2 +
 drivers/thermal/samsung/acpm-tmu.c                 | 539 +++++++++++++++++++++
 .../linux/firmware/samsung/exynos-acpm-protocol.h  |  32 +-
 18 files changed, 1176 insertions(+), 61 deletions(-)
---
base-commit: c1f49dea2b8f335813d3b348fd39117fb8efb428
change-id: 20260113-acpm-tmu-27e21f0e2c3b

Best regards,
-- 
Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>