[PATCH net 12/18] drivers: net: cirrus: mac89x0: Remove this driver
From: Andrew Lunn
Date: Tue Apr 21 2026 - 16:01:45 EST
The mac89x0 was written by Russell Nelson in 1996. It is an MAC
device, so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
---
drivers/net/ethernet/cirrus/Kconfig | 10 -
drivers/net/ethernet/cirrus/Makefile | 1 -
drivers/net/ethernet/cirrus/cs89x0.h | 461 ---------------------------
drivers/net/ethernet/cirrus/mac89x0.c | 577 ----------------------------------
4 files changed, 1049 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 1a0c7b3bfcd6..786d379e79fe 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -25,14 +25,4 @@ config EP93XX_ETH
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
-config MAC89x0
- tristate "Macintosh CS89x0 based ethernet cards"
- depends on MAC
- help
- Support for CS89x0 chipset based Ethernet cards. If you have a
- Nubus or LC-PDS network (Ethernet) card of this type, say Y here.
-
- To compile this driver as a module, choose M here. This module will
- be called mac89x0.
-
endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
index cb740939d976..03800af0f0e1 100644
--- a/drivers/net/ethernet/cirrus/Makefile
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -4,4 +4,3 @@
#
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
diff --git a/drivers/net/ethernet/cirrus/cs89x0.h b/drivers/net/ethernet/cirrus/cs89x0.h
deleted file mode 100644
index 210f9ec9af4b..000000000000
--- a/drivers/net/ethernet/cirrus/cs89x0.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/* Copyright, 1988-1992, Russell Nelson, Crynwr Software
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, version 1.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */
- /* offset 2h -> Model/Product Number */
- /* offset 3h -> Chip Revision Number */
-
-#define PP_ISAIOB 0x0020 /* IO base address */
-#define PP_CS8900_ISAINT 0x0022 /* ISA interrupt select */
-#define PP_CS8920_ISAINT 0x0370 /* ISA interrupt select */
-#define PP_CS8900_ISADMA 0x0024 /* ISA Rec DMA channel */
-#define PP_CS8920_ISADMA 0x0374 /* ISA Rec DMA channel */
-#define PP_ISASOF 0x0026 /* ISA DMA offset */
-#define PP_DmaFrameCnt 0x0028 /* ISA DMA Frame count */
-#define PP_DmaByteCnt 0x002A /* ISA DMA Byte count */
-#define PP_CS8900_ISAMemB 0x002C /* Memory base */
-#define PP_CS8920_ISAMemB 0x0348 /* */
-
-#define PP_ISABootBase 0x0030 /* Boot Prom base */
-#define PP_ISABootMask 0x0034 /* Boot Prom Mask */
-
-/* EEPROM data and command registers */
-#define PP_EECMD 0x0040 /* NVR Interface Command register */
-#define PP_EEData 0x0042 /* NVR Interface Data Register */
-#define PP_DebugReg 0x0044 /* Debug Register */
-
-#define PP_RxCFG 0x0102 /* Rx Bus config */
-#define PP_RxCTL 0x0104 /* Receive Control Register */
-#define PP_TxCFG 0x0106 /* Transmit Config Register */
-#define PP_TxCMD 0x0108 /* Transmit Command Register */
-#define PP_BufCFG 0x010A /* Bus configuration Register */
-#define PP_LineCTL 0x0112 /* Line Config Register */
-#define PP_SelfCTL 0x0114 /* Self Command Register */
-#define PP_BusCTL 0x0116 /* ISA bus control Register */
-#define PP_TestCTL 0x0118 /* Test Register */
-#define PP_AutoNegCTL 0x011C /* Auto Negotiation Ctrl */
-
-#define PP_ISQ 0x0120 /* Interrupt Status */
-#define PP_RxEvent 0x0124 /* Rx Event Register */
-#define PP_TxEvent 0x0128 /* Tx Event Register */
-#define PP_BufEvent 0x012C /* Bus Event Register */
-#define PP_RxMiss 0x0130 /* Receive Miss Count */
-#define PP_TxCol 0x0132 /* Transmit Collision Count */
-#define PP_LineST 0x0134 /* Line State Register */
-#define PP_SelfST 0x0136 /* Self State register */
-#define PP_BusST 0x0138 /* Bus Status */
-#define PP_TDR 0x013C /* Time Domain Reflectometry */
-#define PP_AutoNegST 0x013E /* Auto Neg Status */
-#define PP_TxCommand 0x0144 /* Tx Command */
-#define PP_TxLength 0x0146 /* Tx Length */
-#define PP_LAF 0x0150 /* Hash Table */
-#define PP_IA 0x0158 /* Physical Address Register */
-
-#define PP_RxStatus 0x0400 /* Receive start of frame */
-#define PP_RxLength 0x0402 /* Receive Length of frame */
-#define PP_RxFrame 0x0404 /* Receive frame pointer */
-#define PP_TxFrame 0x0A00 /* Transmit frame pointer */
-
-/* Primary I/O Base Address. If no I/O base is supplied by the user, then this */
-/* can be used as the default I/O base to access the PacketPage Area. */
-#define DEFAULTIOBASE 0x0300
-#define FIRST_IO 0x020C /* First I/O port to check */
-#define LAST_IO 0x037C /* Last I/O port to check (+10h) */
-#define ADD_MASK 0x3000 /* Mask it use of the ADD_PORT register */
-#define ADD_SIG 0x3000 /* Expected ID signature */
-
-/* On Macs, we only need use the ISA I/O stuff until we do MEMORY_ON */
-#ifdef CONFIG_MAC
-#define LCSLOTBASE 0xfee00000
-#define MMIOBASE 0x40000
-#endif
-
-#define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */
-#define CHIP_EISA_ID_SIG_STR "0x630E"
-
-#ifdef IBMEIPKT
-#define EISA_ID_SIG 0x4D24 /* IBM */
-#define PART_NO_SIG 0x1010 /* IBM */
-#define MONGOOSE_BIT 0x0000 /* IBM */
-#else
-#define EISA_ID_SIG 0x630E /* PnP Vendor ID (same as chip id for Crystal board) */
-#define PART_NO_SIG 0x4000 /* ID code CS8920 board (PnP Vendor Product code) */
-#define MONGOOSE_BIT 0x2000 /* PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */
-#endif
-
-#define PRODUCT_ID_ADD 0x0002 /* Address of product ID */
-
-/* Mask to find out the types of registers */
-#define REG_TYPE_MASK 0x001F
-
-/* Eeprom Commands */
-#define ERSE_WR_ENBL 0x00F0
-#define ERSE_WR_DISABLE 0x0000
-
-/* Defines Control/Config register quintuplet numbers */
-#define RX_BUF_CFG 0x0003
-#define RX_CONTROL 0x0005
-#define TX_CFG 0x0007
-#define TX_COMMAND 0x0009
-#define BUF_CFG 0x000B
-#define LINE_CONTROL 0x0013
-#define SELF_CONTROL 0x0015
-#define BUS_CONTROL 0x0017
-#define TEST_CONTROL 0x0019
-
-/* Defines Status/Count registers quintuplet numbers */
-#define RX_EVENT 0x0004
-#define TX_EVENT 0x0008
-#define BUF_EVENT 0x000C
-#define RX_MISS_COUNT 0x0010
-#define TX_COL_COUNT 0x0012
-#define LINE_STATUS 0x0014
-#define SELF_STATUS 0x0016
-#define BUS_STATUS 0x0018
-#define TDR 0x001C
-
-/* PP_RxCFG - Receive Configuration and Interrupt Mask bit definition - Read/write */
-#define SKIP_1 0x0040
-#define RX_STREAM_ENBL 0x0080
-#define RX_OK_ENBL 0x0100
-#define RX_DMA_ONLY 0x0200
-#define AUTO_RX_DMA 0x0400
-#define BUFFER_CRC 0x0800
-#define RX_CRC_ERROR_ENBL 0x1000
-#define RX_RUNT_ENBL 0x2000
-#define RX_EXTRA_DATA_ENBL 0x4000
-
-/* PP_RxCTL - Receive Control bit definition - Read/write */
-#define RX_IA_HASH_ACCEPT 0x0040
-#define RX_PROM_ACCEPT 0x0080
-#define RX_OK_ACCEPT 0x0100
-#define RX_MULTCAST_ACCEPT 0x0200
-#define RX_IA_ACCEPT 0x0400
-#define RX_BROADCAST_ACCEPT 0x0800
-#define RX_BAD_CRC_ACCEPT 0x1000
-#define RX_RUNT_ACCEPT 0x2000
-#define RX_EXTRA_DATA_ACCEPT 0x4000
-#define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT)
-/* Default receive mode - individually addressed, broadcast, and error free */
-#define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT)
-
-/* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */
-#define TX_LOST_CRS_ENBL 0x0040
-#define TX_SQE_ERROR_ENBL 0x0080
-#define TX_OK_ENBL 0x0100
-#define TX_LATE_COL_ENBL 0x0200
-#define TX_JBR_ENBL 0x0400
-#define TX_ANY_COL_ENBL 0x0800
-#define TX_16_COL_ENBL 0x8000
-
-/* PP_TxCMD - Transmit Command bit definition - Read-only */
-#define TX_START_4_BYTES 0x0000
-#define TX_START_64_BYTES 0x0040
-#define TX_START_128_BYTES 0x0080
-#define TX_START_ALL_BYTES 0x00C0
-#define TX_FORCE 0x0100
-#define TX_ONE_COL 0x0200
-#define TX_TWO_PART_DEFF_DISABLE 0x0400
-#define TX_NO_CRC 0x1000
-#define TX_RUNT 0x2000
-
-/* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */
-#define GENERATE_SW_INTERRUPT 0x0040
-#define RX_DMA_ENBL 0x0080
-#define READY_FOR_TX_ENBL 0x0100
-#define TX_UNDERRUN_ENBL 0x0200
-#define RX_MISS_ENBL 0x0400
-#define RX_128_BYTE_ENBL 0x0800
-#define TX_COL_COUNT_OVRFLOW_ENBL 0x1000
-#define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000
-#define RX_DEST_MATCH_ENBL 0x8000
-
-/* PP_LineCTL - Line Control bit definition - Read/write */
-#define SERIAL_RX_ON 0x0040
-#define SERIAL_TX_ON 0x0080
-#define AUI_ONLY 0x0100
-#define AUTO_AUI_10BASET 0x0200
-#define MODIFIED_BACKOFF 0x0800
-#define NO_AUTO_POLARITY 0x1000
-#define TWO_PART_DEFDIS 0x2000
-#define LOW_RX_SQUELCH 0x4000
-
-/* PP_SelfCTL - Software Self Control bit definition - Read/write */
-#define POWER_ON_RESET 0x0040
-#define SW_STOP 0x0100
-#define SLEEP_ON 0x0200
-#define AUTO_WAKEUP 0x0400
-#define HCB0_ENBL 0x1000
-#define HCB1_ENBL 0x2000
-#define HCB0 0x4000
-#define HCB1 0x8000
-
-/* PP_BusCTL - ISA Bus Control bit definition - Read/write */
-#define RESET_RX_DMA 0x0040
-#define MEMORY_ON 0x0400
-#define DMA_BURST_MODE 0x0800
-#define IO_CHANNEL_READY_ON 0x1000
-#define RX_DMA_SIZE_64K 0x2000
-#define ENABLE_IRQ 0x8000
-
-/* PP_TestCTL - Test Control bit definition - Read/write */
-#define LINK_OFF 0x0080
-#define ENDEC_LOOPBACK 0x0200
-#define AUI_LOOPBACK 0x0400
-#define BACKOFF_OFF 0x0800
-#define FDX_8900 0x4000
-#define FAST_TEST 0x8000
-
-/* PP_RxEvent - Receive Event Bit definition - Read-only */
-#define RX_IA_HASHED 0x0040
-#define RX_DRIBBLE 0x0080
-#define RX_OK 0x0100
-#define RX_HASHED 0x0200
-#define RX_IA 0x0400
-#define RX_BROADCAST 0x0800
-#define RX_CRC_ERROR 0x1000
-#define RX_RUNT 0x2000
-#define RX_EXTRA_DATA 0x4000
-
-#define HASH_INDEX_MASK 0x0FC00
-
-/* PP_TxEvent - Transmit Event Bit definition - Read-only */
-#define TX_LOST_CRS 0x0040
-#define TX_SQE_ERROR 0x0080
-#define TX_OK 0x0100
-#define TX_LATE_COL 0x0200
-#define TX_JBR 0x0400
-#define TX_16_COL 0x8000
-#define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS)
-#define TX_COL_COUNT_MASK 0x7800
-
-/* PP_BufEvent - Buffer Event Bit definition - Read-only */
-#define SW_INTERRUPT 0x0040
-#define RX_DMA 0x0080
-#define READY_FOR_TX 0x0100
-#define TX_UNDERRUN 0x0200
-#define RX_MISS 0x0400
-#define RX_128_BYTE 0x0800
-#define TX_COL_OVRFLW 0x1000
-#define RX_MISS_OVRFLW 0x2000
-#define RX_DEST_MATCH 0x8000
-
-/* PP_LineST - Ethernet Line Status bit definition - Read-only */
-#define LINK_OK 0x0080
-#define AUI_ON 0x0100
-#define TENBASET_ON 0x0200
-#define POLARITY_OK 0x1000
-#define CRS_OK 0x4000
-
-/* PP_SelfST - Chip Software Status bit definition */
-#define ACTIVE_33V 0x0040
-#define INIT_DONE 0x0080
-#define SI_BUSY 0x0100
-#define EEPROM_PRESENT 0x0200
-#define EEPROM_OK 0x0400
-#define EL_PRESENT 0x0800
-#define EE_SIZE_64 0x1000
-
-/* PP_BusST - ISA Bus Status bit definition */
-#define TX_BID_ERROR 0x0080
-#define READY_FOR_TX_NOW 0x0100
-
-/* PP_AutoNegCTL - Auto Negotiation Control bit definition */
-#define RE_NEG_NOW 0x0040
-#define ALLOW_FDX 0x0080
-#define AUTO_NEG_ENABLE 0x0100
-#define NLP_ENABLE 0x0200
-#define FORCE_FDX 0x8000
-#define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE)
-#define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW)
-
-/* PP_AutoNegST - Auto Negotiation Status bit definition */
-#define AUTO_NEG_BUSY 0x0080
-#define FLP_LINK 0x0100
-#define FLP_LINK_GOOD 0x0800
-#define LINK_FAULT 0x1000
-#define HDX_ACTIVE 0x4000
-#define FDX_ACTIVE 0x8000
-
-/* The following block defines the ISQ event types */
-#define ISQ_RECEIVER_EVENT 0x04
-#define ISQ_TRANSMITTER_EVENT 0x08
-#define ISQ_BUFFER_EVENT 0x0c
-#define ISQ_RX_MISS_EVENT 0x10
-#define ISQ_TX_COL_EVENT 0x12
-
-#define ISQ_EVENT_MASK 0x003F /* ISQ mask to find out type of event */
-#define ISQ_HIST 16 /* small history buffer */
-#define AUTOINCREMENT 0x8000 /* Bit mask to set bit-15 for autoincrement */
-
-#define TXRXBUFSIZE 0x0600
-#define RXDMABUFSIZE 0x8000
-#define RXDMASIZE 0x4000
-#define TXRX_LENGTH_MASK 0x07FF
-
-/* rx options bits */
-#define RCV_WITH_RXON 1 /* Set SerRx ON */
-#define RCV_COUNTS 2 /* Use Framecnt1 */
-#define RCV_PONG 4 /* Pong respondent */
-#define RCV_DONG 8 /* Dong operation */
-#define RCV_POLLING 0x10 /* Poll RxEvent */
-#define RCV_ISQ 0x20 /* Use ISQ, int */
-#define RCV_AUTO_DMA 0x100 /* Set AutoRxDMAE */
-#define RCV_DMA 0x200 /* Set RxDMA only */
-#define RCV_DMA_ALL 0x400 /* Copy all DMA'ed */
-#define RCV_FIXED_DATA 0x800 /* Every frame same */
-#define RCV_IO 0x1000 /* Use ISA IO only */
-#define RCV_MEMORY 0x2000 /* Use ISA Memory */
-
-#define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */
-#define PKT_START PP_TxFrame /* Start of packet RAM */
-
-#define RX_FRAME_PORT 0x0000
-#define TX_FRAME_PORT RX_FRAME_PORT
-#define TX_CMD_PORT 0x0004
-#define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */
-#define TX_AFTER_381 0x0040 /* Tx packet after 381 bytes copied */
-#define TX_AFTER_ALL 0x00c0 /* Tx packet after all bytes copied */
-#define TX_LEN_PORT 0x0006
-#define ISQ_PORT 0x0008
-#define ADD_PORT 0x000A
-#define DATA_PORT 0x000C
-
-#define EEPROM_WRITE_EN 0x00F0
-#define EEPROM_WRITE_DIS 0x0000
-#define EEPROM_WRITE_CMD 0x0100
-#define EEPROM_READ_CMD 0x0200
-
-/* Receive Header */
-/* Description of header of each packet in receive area of memory */
-#define RBUF_EVENT_LOW 0 /* Low byte of RxEvent - status of received frame */
-#define RBUF_EVENT_HIGH 1 /* High byte of RxEvent - status of received frame */
-#define RBUF_LEN_LOW 2 /* Length of received data - low byte */
-#define RBUF_LEN_HI 3 /* Length of received data - high byte */
-#define RBUF_HEAD_LEN 4 /* Length of this header */
-
-#define CHIP_READ 0x1 /* Used to mark state of the repins code (chip or dma) */
-#define DMA_READ 0x2 /* Used to mark state of the repins code (chip or dma) */
-
-/* for bios scan */
-/* */
-#ifdef CSDEBUG
-/* use these values for debugging bios scan */
-#define BIOS_START_SEG 0x00000
-#define BIOS_OFFSET_INC 0x0010
-#else
-#define BIOS_START_SEG 0x0c000
-#define BIOS_OFFSET_INC 0x0200
-#endif
-
-#define BIOS_LAST_OFFSET 0x0fc00
-
-/* Byte offsets into the EEPROM configuration buffer */
-#define ISA_CNF_OFFSET 0x6
-#define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8) /* 8900 eeprom */
-#define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8) /* 8920 eeprom */
-
- /* the assumption here is that the bits in the eeprom are generally */
- /* in the same position as those in the autonegctl register. */
- /* Of course the IMM bit is not in that register so it must be */
- /* masked out */
-#define EE_FORCE_FDX 0x8000
-#define EE_NLP_ENABLE 0x0200
-#define EE_AUTO_NEG_ENABLE 0x0100
-#define EE_ALLOW_FDX 0x0080
-#define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX)
-
-#define IMM_BIT 0x0040 /* ignore missing media */
-
-#define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2)
-#define A_CNF_10B_T 0x0001
-#define A_CNF_AUI 0x0002
-#define A_CNF_10B_2 0x0004
-#define A_CNF_MEDIA_TYPE 0x0070
-#define A_CNF_MEDIA_AUTO 0x0070
-#define A_CNF_MEDIA_10B_T 0x0020
-#define A_CNF_MEDIA_AUI 0x0040
-#define A_CNF_MEDIA_10B_2 0x0010
-#define A_CNF_DC_DC_POLARITY 0x0080
-#define A_CNF_NO_AUTO_POLARITY 0x2000
-#define A_CNF_LOW_RX_SQUELCH 0x4000
-#define A_CNF_EXTND_10B_2 0x8000
-
-#define PACKET_PAGE_OFFSET 0x8
-
-/* Bit definitions for the ISA configuration word from the EEPROM */
-#define INT_NO_MASK 0x000F
-#define DMA_NO_MASK 0x0070
-#define ISA_DMA_SIZE 0x0200
-#define ISA_AUTO_RxDMA 0x0400
-#define ISA_RxDMA 0x0800
-#define DMA_BURST 0x1000
-#define STREAM_TRANSFER 0x2000
-#define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA)
-
-/* DMA controller registers */
-#define DMA_BASE 0x00 /* DMA controller base */
-#define DMA_BASE_2 0x0C0 /* DMA controller base */
-
-#define DMA_STAT 0x0D0 /* DMA controller status register */
-#define DMA_MASK 0x0D4 /* DMA controller mask register */
-#define DMA_MODE 0x0D6 /* DMA controller mode register */
-#define DMA_RESETFF 0x0D8 /* DMA controller first/last flip flop */
-
-/* DMA data */
-#define DMA_DISABLE 0x04 /* Disable channel n */
-#define DMA_ENABLE 0x00 /* Enable channel n */
-/* Demand transfers, incr. address, auto init, writes, ch. n */
-#define DMA_RX_MODE 0x14
-/* Demand transfers, incr. address, auto init, reads, ch. n */
-#define DMA_TX_MODE 0x18
-
-#define DMA_SIZE (16*1024) /* Size of dma buffer - 16k */
-
-#define CS8900 0x0000
-#define CS8920 0x4000
-#define CS8920M 0x6000
-#define REVISON_BITS 0x1F00
-#define EEVER_NUMBER 0x12
-#define CHKSUM_LEN 0x14
-#define CHKSUM_VAL 0x0000
-#define START_EEPROM_DATA 0x001c /* Offset into eeprom for start of data */
-#define IRQ_MAP_EEPROM_DATA 0x0046 /* Offset into eeprom for the IRQ map */
-#define IRQ_MAP_LEN 0x0004 /* No of bytes to read for the IRQ map */
-#define PNP_IRQ_FRMT 0x0022 /* PNP small item IRQ format */
-#define CS8900_IRQ_MAP 0x1c20 /* This IRQ map is fixed */
-
-#define CS8920_NO_INTS 0x0F /* Max CS8920 interrupt select # */
-
-#define PNP_ADD_PORT 0x0279
-#define PNP_WRITE_PORT 0x0A79
-
-#define GET_PNP_ISA_STRUCT 0x40
-#define PNP_ISA_STRUCT_LEN 0x06
-#define PNP_CSN_CNT_OFF 0x01
-#define PNP_RD_PORT_OFF 0x02
-#define PNP_FUNCTION_OK 0x00
-#define PNP_WAKE 0x03
-#define PNP_RSRC_DATA 0x04
-#define PNP_RSRC_READY 0x01
-#define PNP_STATUS 0x05
-#define PNP_ACTIVATE 0x30
-#define PNP_CNF_IO_H 0x60
-#define PNP_CNF_IO_L 0x61
-#define PNP_CNF_INT 0x70
-#define PNP_CNF_DMA 0x74
-#define PNP_CNF_MEM 0x48
diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
deleted file mode 100644
index 6723df9b65d9..000000000000
--- a/drivers/net/ethernet/cirrus/mac89x0.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
-/*
- Written 1996 by Russell Nelson, with reference to skeleton.c
- written 1993-1994 by Donald Becker.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached at nelson@xxxxxxxxxx, Crynwr
- Software, 11 Grant St., Potsdam, NY 13676
-
- Changelog:
-
- Mike Cruse : mcruse@xxxxxxxxxxx
- : Changes for Linux 2.0 compatibility.
- : Added dev_id parameter in net_interrupt(),
- : request_irq() and free_irq(). Just NULL for now.
-
- Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
- : in net_open() and net_close() so kerneld would know
- : that the module is in use and wouldn't eject the
- : driver prematurely.
-
- Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
- : as an example. Disabled autoprobing in init_module(),
- : not a good thing to do to other devices while Linux
- : is running from all accounts.
-
- Alan Cox : Removed 1.2 support, added 2.1 extra counters.
-
- David Huggins-Daines <dhd@xxxxxxxxxx>
-
- Split this off into mac89x0.c, and gutted it of all parts which are
- not relevant to the existing CS8900 cards on the Macintosh
- (i.e. basically the Daynaport CS and LC cards). To be precise:
-
- * Removed all the media-detection stuff, because these cards are
- TP-only.
-
- * Lobotomized the ISA interrupt bogosity, because these cards use
- a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
-
- * Basically eliminated everything not relevant to getting the
- cards minimally functioning on the Macintosh.
-
- I might add that these cards are badly designed even from the Mac
- standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
- I/O space and NuBus interrupts for these cards, but neglected to
- provide anything even remotely resembling a NuBus ROM. Therefore we
- have to probe for them in a brain-damaged ISA-like fashion.
-
- Arnaldo Carvalho de Melo <acme@xxxxxxxxxxxxxxxx> - 11/01/2001
- check kmalloc and release the allocated memory on failure in
- mac89x0_probe and in init_module
- use local_irq_{save,restore}(flags) in net_get_stat, not just
- local_irq_{dis,en}able()
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-static const char version[] =
-"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@xxxxxxxxxx>\n";
-
-#include <linux/module.h>
-
-/*
- Sources:
-
- Crynwr packet driver epktisa.
-
- Crystal Semiconductor data sheets.
-
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/nubus.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/platform_device.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/hwtest.h>
-#include <asm/macints.h>
-
-#include "cs89x0.h"
-
-static int debug = -1;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "debug message level");
-
-/* Information that need to be kept for each board. */
-struct net_local {
- int msg_enable;
- int chip_type; /* one of: CS8900, CS8920, CS8920M */
- char chip_revision; /* revision letter of the chip ('A'...) */
- int send_cmd; /* the propercommand used to send a packet. */
- int rx_mode;
- int curr_rx_cfg;
- int send_underrun; /* keep track of how many underruns in a row we get */
-};
-
-/* Index to functions, as function prototypes. */
-static int net_open(struct net_device *dev);
-static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void set_multicast_list(struct net_device *dev);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static int set_mac_address(struct net_device *dev, void *addr);
-
-/* For reading/writing registers ISA-style */
-static inline int
-readreg_io(struct net_device *dev, int portno)
-{
- nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
- return swab16(nubus_readw(dev->base_addr + DATA_PORT));
-}
-
-static inline void
-writereg_io(struct net_device *dev, int portno, int value)
-{
- nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
- nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
-}
-
-/* These are for reading/writing registers in shared memory */
-static inline int
-readreg(struct net_device *dev, int portno)
-{
- return swab16(nubus_readw(dev->mem_start + portno));
-}
-
-static inline void
-writereg(struct net_device *dev, int portno, int value)
-{
- nubus_writew(swab16(value), dev->mem_start + portno);
-}
-
-static const struct net_device_ops mac89x0_netdev_ops = {
- .ndo_open = net_open,
- .ndo_stop = net_close,
- .ndo_start_xmit = net_send_packet,
- .ndo_get_stats = net_get_stats,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-/* Probe for the CS8900 card in slot E. We won't bother looking
- anywhere else until we have a really good reason to do so. */
-static int mac89x0_device_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct net_local *lp;
- int i, slot;
- unsigned rev_type = 0;
- unsigned long ioaddr;
- unsigned short sig;
- int err = -ENODEV;
- struct nubus_rsrc *fres;
-
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return -ENOMEM;
-
- /* We might have to parameterize this later */
- slot = 0xE;
- /* Get out now if there's a real NuBus card in slot E */
- for_each_func_rsrc(fres)
- if (fres->board->slot == slot)
- goto out;
-
- /* The pseudo-ISA bits always live at offset 0x300 (gee,
- wonder why...) */
- ioaddr = (unsigned long)
- nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
- {
- int card_present;
-
- card_present = (hwreg_present((void *)ioaddr + 4) &&
- hwreg_present((void *)ioaddr + DATA_PORT));
- if (!card_present)
- goto out;
- }
-
- nubus_writew(0, ioaddr + ADD_PORT);
- sig = nubus_readw(ioaddr + DATA_PORT);
- if (sig != swab16(CHIP_EISA_ID_SIG))
- goto out;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- /* Initialize the net_device structure. */
- lp = netdev_priv(dev);
-
- lp->msg_enable = netif_msg_init(debug, 0);
-
- /* Fill in the 'dev' fields. */
- dev->base_addr = ioaddr;
- dev->mem_start = (unsigned long)
- nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
- dev->mem_end = dev->mem_start + 0x1000;
-
- /* Turn on shared memory */
- writereg_io(dev, PP_BusCTL, MEMORY_ON);
-
- /* get the chip type */
- rev_type = readreg(dev, PRODUCT_ID_ADD);
- lp->chip_type = rev_type &~ REVISON_BITS;
- lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
-
- /* Check the chip type and revision in order to set the correct send command
- CS8920 revision C and CS8900 revision F can use the faster send. */
- lp->send_cmd = TX_AFTER_381;
- if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
- lp->send_cmd = TX_NOW;
- if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
- lp->send_cmd = TX_NOW;
-
- netif_dbg(lp, drv, dev, "%s", version);
-
- pr_info("cs89%c0%s rev %c found at %#8lx\n",
- lp->chip_type == CS8900 ? '0' : '2',
- lp->chip_type == CS8920M ? "M" : "",
- lp->chip_revision, dev->base_addr);
-
- /* Try to read the MAC address */
- if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
- pr_info("No EEPROM, giving up now.\n");
- goto out1;
- } else {
- u8 addr[ETH_ALEN];
-
- for (i = 0; i < ETH_ALEN; i += 2) {
- /* Big-endian (why??!) */
- unsigned short s = readreg(dev, PP_IA + i);
- addr[i] = s >> 8;
- addr[i+1] = s & 0xff;
- }
- eth_hw_addr_set(dev, addr);
- }
-
- dev->irq = SLOT2IRQ(slot);
-
- /* print the IRQ and ethernet address. */
-
- pr_info("MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq);
-
- dev->netdev_ops = &mac89x0_netdev_ops;
-
- err = register_netdev(dev);
- if (err)
- goto out1;
-
- platform_set_drvdata(pdev, dev);
- return 0;
-out1:
- nubus_writew(0, dev->base_addr + ADD_PORT);
-out:
- free_netdev(dev);
- return err;
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
- */
-static int
-net_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int i;
-
- /* Disable the interrupt for now */
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
-
- /* Grab the interrupt */
- if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
- return -EAGAIN;
-
- /* Set up the IRQ - Apparently magic */
- if (lp->chip_type == CS8900)
- writereg(dev, PP_CS8900_ISAINT, 0);
- else
- writereg(dev, PP_CS8920_ISAINT, 0);
-
- /* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
- /* Turn on both receive and transmit operations */
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
-
- /* Receive only error free packets addressed to this card */
- lp->rx_mode = 0;
- writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
-
- lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
-
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
-
- writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
- TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
-
- writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
- TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
-
- /* now that we've got our act together, enable everything */
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
- netif_start_queue(dev);
- return 0;
-}
-
-static netdev_tx_t
-net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- netif_dbg(lp, tx_queued, dev, "sent %d byte packet of type %x\n",
- skb->len, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
- skb->data[ETH_ALEN + ETH_ALEN + 1]);
-
- /* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
- local_irq_save(flags);
- netif_stop_queue(dev);
-
- /* initiate a transmit sequence */
- writereg(dev, PP_TxCMD, lp->send_cmd);
- writereg(dev, PP_TxLength, skb->len);
-
- /* Test to see if the chip has allocated memory for the packet */
- if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
- /* Gasp! It hasn't. But that shouldn't happen since
- we're waiting for TxOk, so return 1 and requeue this packet. */
- local_irq_restore(flags);
- return NETDEV_TX_BUSY;
- }
-
- /* Write the contents of the packet */
- skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
- skb->len+1);
-
- local_irq_restore(flags);
- dev_kfree_skb (skb);
-
- return NETDEV_TX_OK;
-}
-
-/* The typical workload of the driver:
- Handle the network interface interrupts. */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct net_local *lp;
- int ioaddr, status;
-
- ioaddr = dev->base_addr;
- lp = netdev_priv(dev);
-
- /* we MUST read all the events out of the ISQ, otherwise we'll never
- get interrupted again. As a consequence, we can't have any limit
- on the number of times we loop in the interrupt handler. The
- hardware guarantees that eventually we'll run out of events. Of
- course, if you're on a slow machine, and packets are arriving
- faster than you can read them off, you're screwed. Hasta la
- vista, baby! */
- while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
- netif_dbg(lp, intr, dev, "status=%04x\n", status);
- switch(status & ISQ_EVENT_MASK) {
- case ISQ_RECEIVER_EVENT:
- /* Got a packet(s). */
- net_rx(dev);
- break;
- case ISQ_TRANSMITTER_EVENT:
- dev->stats.tx_packets++;
- netif_wake_queue(dev);
- if ((status & TX_OK) == 0)
- dev->stats.tx_errors++;
- if (status & TX_LOST_CRS)
- dev->stats.tx_carrier_errors++;
- if (status & TX_SQE_ERROR)
- dev->stats.tx_heartbeat_errors++;
- if (status & TX_LATE_COL)
- dev->stats.tx_window_errors++;
- if (status & TX_16_COL)
- dev->stats.tx_aborted_errors++;
- break;
- case ISQ_BUFFER_EVENT:
- if (status & READY_FOR_TX) {
- /* we tried to transmit a packet earlier,
- but inexplicably ran out of buffers.
- That shouldn't happen since we only ever
- load one packet. Shrug. Do the right
- thing anyway. */
- netif_wake_queue(dev);
- }
- if (status & TX_UNDERRUN) {
- netif_dbg(lp, tx_err, dev, "transmit underrun\n");
- lp->send_underrun++;
- if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
- }
- break;
- case ISQ_RX_MISS_EVENT:
- dev->stats.rx_missed_errors += (status >> 6);
- break;
- case ISQ_TX_COL_EVENT:
- dev->stats.collisions += (status >> 6);
- break;
- }
- }
- return IRQ_HANDLED;
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- struct sk_buff *skb;
- int status, length;
-
- status = readreg(dev, PP_RxStatus);
- if ((status & RX_OK) == 0) {
- dev->stats.rx_errors++;
- if (status & RX_RUNT)
- dev->stats.rx_length_errors++;
- if (status & RX_EXTRA_DATA)
- dev->stats.rx_length_errors++;
- if ((status & RX_CRC_ERROR) &&
- !(status & (RX_EXTRA_DATA|RX_RUNT)))
- /* per str 172 */
- dev->stats.rx_crc_errors++;
- if (status & RX_DRIBBLE)
- dev->stats.rx_frame_errors++;
- return;
- }
-
- length = readreg(dev, PP_RxLength);
- /* Malloc up new buffer. */
- skb = alloc_skb(length, GFP_ATOMIC);
- if (skb == NULL) {
- dev->stats.rx_dropped++;
- return;
- }
- skb_put(skb, length);
-
- skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
- length);
-
- netif_dbg(lp, rx_status, dev, "received %d byte packet of type %x\n",
- length, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
- skb->data[ETH_ALEN + ETH_ALEN + 1]);
-
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += length;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-
- writereg(dev, PP_RxCFG, 0);
- writereg(dev, PP_TxCFG, 0);
- writereg(dev, PP_BufCFG, 0);
- writereg(dev, PP_BusCTL, 0);
-
- netif_stop_queue(dev);
-
- free_irq(dev->irq, dev);
-
- /* Update the statistics here. */
-
- return 0;
-
-}
-
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *
-net_get_stats(struct net_device *dev)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- /* Update the statistics from the device registers. */
- dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
- dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
- local_irq_restore(flags);
-
- return &dev->stats;
-}
-
-static void set_multicast_list(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- if(dev->flags&IFF_PROMISC)
- {
- lp->rx_mode = RX_ALL_ACCEPT;
- } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
- /* The multicast-accept list is initialized to accept-all, and we
- rely on higher-level filtering for now. */
- lp->rx_mode = RX_MULTCAST_ACCEPT;
- }
- else
- lp->rx_mode = 0;
-
- writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
-
- /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
-}
-
-
-static int set_mac_address(struct net_device *dev, void *addr)
-{
- struct sockaddr *saddr = addr;
- int i;
-
- if (!is_valid_ether_addr(saddr->sa_data))
- return -EADDRNOTAVAIL;
-
- eth_hw_addr_set(dev, saddr->sa_data);
- netdev_info(dev, "Setting MAC address to %pM\n", dev->dev_addr);
-
- /* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
-
- return 0;
-}
-
-MODULE_DESCRIPTION("Macintosh CS89x0-based Ethernet driver");
-MODULE_LICENSE("GPL");
-
-static void mac89x0_device_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
-
- unregister_netdev(dev);
- nubus_writew(0, dev->base_addr + ADD_PORT);
- free_netdev(dev);
-}
-
-static struct platform_driver mac89x0_platform_driver = {
- .probe = mac89x0_device_probe,
- .remove = mac89x0_device_remove,
- .driver = {
- .name = "mac89x0",
- },
-};
-
-module_platform_driver(mac89x0_platform_driver);
--
2.53.0