Re: [PATCH v1 14/14] dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device

[Krzysztof Kozlowski]

On Sun, Apr 19, 2026 at 08:21:58PM +0200, Daniel Lezcano wrote:
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> index b9022f1613d8..28f5818f1e60 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> @@ -44,10 +44,14 @@ select: true
>  properties:
>    "#cooling-cells":
>      description:
> -      Must be 2, in order to specify minimum and maximum cooling state used in
> +      Must be 2 or 3. If 2, specifies minimum and maximum cooling state used in
>        the cooling-maps reference. The first cell is the minimum cooling state
>        and the second cell is the maximum cooling state requested.
> -    const: 2
> +      If 3, the first cell specifies the thermal mitigation device specifier
> +      index for devices that support multiple thermal mitigation mechanisms.
> +      The two other cells are respectively the minimum cooling state and the
> +      maximum cooling state.
> +    enum: [2, 3]

In the same commit you need to narrow
Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
so it will keep value of '2' (const: 2, like all other bindings).

Best regards,
Krzysztof