[net-next v2 0/3] Add motorcomm 8531s set ds func and 8522 driver

[Minda Chen]

This patch is for Starfive JHB100 EVB board. JHB100  contain
1 RGMII/RMII and 1 RMII synopsys GMAC cores. In the EVB board, RGMII
interface connect with YT8531s Ethernet PHY. RMII interface connect
with YT8522 ethernet PHY. So patch 1-2 is for RGMII interface
patch 3 is RMII is for RMII interface.

JHB100 is a Starfive new RISC-V SoC for datacenter BMC (BaseBoard
Managent Controller). Similar with Aspeed 27x0.

The JHB100 minimal system upstream is in progress:
https://patchwork.kernel.org/project/linux-riscv/cover/20260403054945.467700-1-changhuang.liang@xxxxxxxxxxxxxxxx/

The patch base in V7.0-rc5

The change list:
v2:
1. patch1 move mdio lock out from  yt8531_set_ds().
2. patch2 changed to phy_interface_is_rgmii().

Minda Chen (3):
  net: phy: motorcomm: move mdio lock out from yt8531_set_ds()
  net: motorcomm: phy: set drive strength in 8531s RGMII case
  net: phy: motorcomm: Add YT8522 100M RMII PHY support

 drivers/net/phy/motorcomm.c | 77 ++++++++++++++++++++++++++++++++-----
 1 file changed, 67 insertions(+), 10 deletions(-)


base-commit: c369299895a591d96745d6492d4888259b004a9e
-- 
2.17.1