Re: [PATCH v2 3/3] arm64: dts: qcom: sm8650: fix soundwire ports properties
From: Konrad Dybcio
Date: Wed Apr 22 2026 - 07:05:42 EST
On 4/20/26 9:26 PM, Neil Armstrong wrote:
> Since commit 9e53a66a2f2f ("soundwire: qcom: deprecate qcom,din/out-ports"),
> the ports are checked against the actul hardware configuration, leading to:
> qcom-soundwire 6ad0000.soundwire: din-ports (0) mismatch with controller (1)
> qcom-soundwire 6d30000.soundwire: dout-ports (0) mismatch with controller (1)
>
> Fix the ports count and properties of the corresponding soundwire
> controllers.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
+Srini please take a look
Konrad
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 42 ++++++++++++++++++------------------
> 1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index c5358894fbb3..2cccfbc6d008 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -4730,18 +4730,18 @@ swr1: soundwire@6ad0000 {
> pinctrl-0 = <&rx_swr_active>;
> pinctrl-names = "default";
>
> - qcom,din-ports = <0>;
> + qcom,din-ports = <1>;
> qcom,dout-ports = <11>;
>
> - qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
> - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
> - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
> - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
> - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
> - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
> - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
> - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
> - qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
> + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff 0xff>;
>
> #address-cells = <2>;
> #size-cells = <0>;
> @@ -4827,17 +4827,17 @@ swr2: soundwire@6d30000 {
> pinctrl-names = "default";
>
> qcom,din-ports = <4>;
> - qcom,dout-ports = <0>;
> -
> - qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>;
> - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>;
> - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>;
> - qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>;
> - qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>;
> - qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>;
> - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>;
> - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>;
> - qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>;
> + qcom,dout-ports = <1>;
> +
> + qcom,ports-sinterval-low = /bits/ 8 <0x00 0x01 0x01 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x00 0x01 0x01>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00 0x00>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0xff 0x01 0x02 0x00 0x00>;
>
> #address-cells = <2>;
> #size-cells = <0>;
>