[PATCH 05/22] dt-bindings: iio: dac: ad5686: add reset/ldac/gain gpio support

[Rodrigo Alencar via B4 Relay]

From: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>

Add GPIO property for RESET, LDAC and GAIN pin. RESET is active-low, LDAC
is used to load DAC channels with values from input registers and GAIN
can double the voltage in output channels. The gain-gpios property is
not available to all supported parts.

Signed-off-by: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/dac/adi,ad5686.yaml    | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index cb035741529f..543ee181f7b3 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -43,17 +43,46 @@ properties:
   vcc-supply:
     description: If not supplied the internal reference is used.
 
+  reset-gpios:
+    description: Active-low RESET pin to reset the device.
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      Active-low LDAC pin used to asynchronously update the DAC channels.
+    maxItems: 1
+
+  gain-gpios:
+    description:
+      GAIN pin that sets a multiplier for the DAC output voltage. When high,
+      the DAC output voltage is multiplied by 2, otherwise it is unchanged.
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,ad5310r
+              - const: adi,ad5681r
+              - const: adi,ad5682r
+              - const: adi,ad5683
+              - const: adi,ad5683r
+    then:
+      properties:
+        gain-gpios: false
 
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -61,6 +90,8 @@ examples:
             reg = <0>;
             compatible = "adi,ad5310r";
             vcc-supply = <&dac_vref0>;
+            reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
         };
     };
 ...

-- 
2.43.0