[PATCH net-next v5 09/10] enic: wire V2 SR-IOV enable with admin channel and MBOX
From: Satish Kharat
Date: Thu Apr 23 2026 - 12:40:53 EST
Extend enic_sriov_configure() to handle V2 SR-IOV VFs. When the PF
detects V2 VF device IDs, the enable path allocates per-VF MBOX state,
opens the admin channel, initializes the MBOX protocol, and then calls
pci_enable_sriov(). The admin channel must be ready before VFs are
created so that VF drivers can immediately begin the MBOX capability
and registration handshake during their probe.
The disable path reverses this order: pci_disable_sriov() first (so VF
drivers unregister via MBOX), then the admin channel is closed and
per-VF state is freed.
Reject VF port profile requests when V2 SR-IOV is active
(enic_is_valid_pp_vf), since enic->pp is not reallocated for V2 VFs
and the V2 protocol uses MBOX instead of port profiles.
Update enic_remove() to run enic_dev_deinit() and vnic_dev_close()
after SR-IOV teardown, so the PF device remains functional while VFs
are being cleaned up. This ordering applies to both V1 and V2 SR-IOV
paths.
Signed-off-by: Satish Kharat <satishkh@xxxxxxxxx>
---
drivers/net/ethernet/cisco/enic/enic.h | 1 +
drivers/net/ethernet/cisco/enic/enic_main.c | 139 ++++++++++++++++++++++++++--
drivers/net/ethernet/cisco/enic/enic_mbox.c | 13 ++-
drivers/net/ethernet/cisco/enic/enic_pp.c | 5 +
drivers/net/ethernet/cisco/enic/enic_res.c | 1 +
drivers/net/ethernet/cisco/enic/vnic_enet.h | 4 +-
6 files changed, 153 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index 29ce26284493..70bb8cb9fe42 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -315,6 +315,7 @@ struct enic {
struct mutex mbox_lock;
u64 mbox_msg_num;
struct completion mbox_comp;
+ bool mbox_initialized;
/* PF: per-VF MBOX state, allocated when SRIOV V2 is enabled */
struct enic_vf_state {
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 53d68272d06a..057716ccc283 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -60,6 +60,8 @@
#include "enic_clsf.h"
#include "enic_rq.h"
#include "enic_wq.h"
+#include "enic_admin.h"
+#include "enic_mbox.h"
#define ENIC_NOTIFY_TIMER_PERIOD (2 * HZ)
@@ -2689,6 +2691,122 @@ static void enic_sriov_detect_vf_type(struct enic *enic)
enic->vf_type = ENIC_VF_TYPE_NONE;
}
}
+
+static int __maybe_unused
+enic_sriov_v2_enable(struct enic *enic, int num_vfs)
+{
+ int err;
+
+ if (!enic->has_admin_channel) {
+ netdev_err(enic->netdev,
+ "V2 SR-IOV requires admin channel resources\n");
+ return -EOPNOTSUPP;
+ }
+
+ enic->vf_state = kcalloc(num_vfs, sizeof(*enic->vf_state), GFP_KERNEL);
+ if (!enic->vf_state)
+ return -ENOMEM;
+
+ err = enic_admin_channel_open(enic);
+ if (err) {
+ netdev_err(enic->netdev,
+ "Failed to open admin channel: %d\n", err);
+ goto free_vf_state;
+ }
+
+ enic_mbox_init(enic);
+
+ enic->num_vfs = num_vfs;
+
+ err = pci_enable_sriov(enic->pdev, num_vfs);
+ if (err) {
+ netdev_err(enic->netdev,
+ "pci_enable_sriov failed: %d\n", err);
+ goto close_admin;
+ }
+
+ enic->priv_flags |= ENIC_SRIOV_ENABLED;
+ return num_vfs;
+
+close_admin:
+ enic->num_vfs = 0;
+ enic_admin_channel_close(enic);
+free_vf_state:
+ kfree(enic->vf_state);
+ enic->vf_state = NULL;
+ return err;
+}
+
+static void enic_sriov_v2_disable(struct enic *enic)
+{
+ pci_disable_sriov(enic->pdev);
+ enic_admin_channel_close(enic);
+ kfree(enic->vf_state);
+ enic->vf_state = NULL;
+ enic->num_vfs = 0;
+ enic->priv_flags &= ~ENIC_SRIOV_ENABLED;
+}
+
+static int __maybe_unused
+enic_sriov_configure(struct pci_dev *pdev, int num_vfs)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct enic *enic = netdev_priv(netdev);
+ struct enic_port_profile *pp;
+ int err;
+
+ if (num_vfs > 0) {
+ if (enic->config.mq_subvnic_count) {
+ netdev_err(netdev,
+ "SR-IOV not supported with multi-queue sub-vnics\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (enic->vf_type == ENIC_VF_TYPE_NONE) {
+ netdev_err(netdev,
+ "SR-IOV not supported on this firmware version\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (enic->vf_type == ENIC_VF_TYPE_V2)
+ return enic_sriov_v2_enable(enic, num_vfs);
+
+ pp = kcalloc(num_vfs, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ err = pci_enable_sriov(pdev, num_vfs);
+ if (err) {
+ kfree(pp);
+ return err;
+ }
+
+ kfree(enic->pp);
+ enic->pp = pp;
+ enic->num_vfs = num_vfs;
+ enic->priv_flags |= ENIC_SRIOV_ENABLED;
+ return num_vfs;
+ }
+
+ if (!enic_sriov_enabled(enic))
+ return 0;
+
+ if (enic->vf_type == ENIC_VF_TYPE_V2) {
+ enic_sriov_v2_disable(enic);
+ return 0;
+ }
+
+ pci_disable_sriov(pdev);
+ enic->num_vfs = 0;
+ enic->priv_flags &= ~ENIC_SRIOV_ENABLED;
+
+ kfree(enic->pp);
+ enic->pp = kzalloc_obj(*enic->pp, GFP_KERNEL);
+ if (!enic->pp)
+ return -ENOMEM;
+
+ return 0;
+}
#endif
static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -2787,12 +2905,18 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_vnic_unregister;
#ifdef CONFIG_PCI_IOV
- /* Get number of subvnics */
+ enic_sriov_detect_vf_type(enic);
+
+ /* Auto-enable SR-IOV if VFs were pre-configured (e.g. at boot).
+ * V2 VFs require the admin channel, which is not yet set up at probe
+ * time; use sysfs (enic_sriov_configure) to enable V2 SR-IOV instead.
+ */
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
if (pos) {
pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF,
&enic->num_vfs);
- if (enic->num_vfs) {
+ if (enic->num_vfs &&
+ enic->vf_type != ENIC_VF_TYPE_V2) {
err = pci_enable_sriov(pdev, enic->num_vfs);
if (err) {
dev_err(dev, "SRIOV enable failed, aborting."
@@ -2804,7 +2928,6 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
num_pps = enic->num_vfs;
}
}
- enic_sriov_detect_vf_type(enic);
#endif
/* Allocate structure for port profiles */
@@ -3033,14 +3156,16 @@ static void enic_remove(struct pci_dev *pdev)
cancel_work_sync(&enic->reset);
cancel_work_sync(&enic->change_mtu_work);
unregister_netdev(netdev);
- enic_dev_deinit(enic);
- vnic_dev_close(enic->vdev);
#ifdef CONFIG_PCI_IOV
if (enic_sriov_enabled(enic)) {
- pci_disable_sriov(pdev);
- enic->priv_flags &= ~ENIC_SRIOV_ENABLED;
+ if (enic->vf_type == ENIC_VF_TYPE_V2)
+ enic_sriov_v2_disable(enic);
+ else
+ pci_disable_sriov(pdev);
}
#endif
+ enic_dev_deinit(enic);
+ vnic_dev_close(enic->vdev);
kfree(enic->pp);
vnic_dev_unregister(enic->vdev);
enic_iounmap(enic);
diff --git a/drivers/net/ethernet/cisco/enic/enic_mbox.c b/drivers/net/ethernet/cisco/enic/enic_mbox.c
index 3819efc837bf..7b5635295352 100644
--- a/drivers/net/ethernet/cisco/enic/enic_mbox.c
+++ b/drivers/net/ethernet/cisco/enic/enic_mbox.c
@@ -553,8 +553,17 @@ int enic_mbox_vf_unregister(struct enic *enic)
void enic_mbox_init(struct enic *enic)
{
+ /* mbox_lock and mbox_comp must be initialized exactly once per
+ * device lifetime; the PF sriov_configure path can re-enter this
+ * on each enable cycle where these primitives are already set up.
+ */
+ if (!enic->mbox_initialized) {
+ mutex_init(&enic->mbox_lock);
+ init_completion(&enic->mbox_comp);
+ enic->mbox_initialized = true;
+ } else {
+ reinit_completion(&enic->mbox_comp);
+ }
enic->mbox_msg_num = 0;
- mutex_init(&enic->mbox_lock);
- init_completion(&enic->mbox_comp);
enic->admin_rq_handler = enic_mbox_recv_handler;
}
diff --git a/drivers/net/ethernet/cisco/enic/enic_pp.c b/drivers/net/ethernet/cisco/enic/enic_pp.c
index 4720a952725d..3f611e240c25 100644
--- a/drivers/net/ethernet/cisco/enic/enic_pp.c
+++ b/drivers/net/ethernet/cisco/enic/enic_pp.c
@@ -25,6 +25,11 @@ int enic_is_valid_pp_vf(struct enic *enic, int vf, int *err)
if (vf != PORT_SELF_VF) {
#ifdef CONFIG_PCI_IOV
if (enic_sriov_enabled(enic)) {
+ /* V2 SR-IOV uses MBOX, not port profiles */
+ if (enic->vf_type == ENIC_VF_TYPE_V2) {
+ *err = -EOPNOTSUPP;
+ goto err_out;
+ }
if (vf < 0 || vf >= enic->num_vfs) {
*err = -EINVAL;
goto err_out;
diff --git a/drivers/net/ethernet/cisco/enic/enic_res.c b/drivers/net/ethernet/cisco/enic/enic_res.c
index 2b7545d6a67f..436326ace049 100644
--- a/drivers/net/ethernet/cisco/enic/enic_res.c
+++ b/drivers/net/ethernet/cisco/enic/enic_res.c
@@ -59,6 +59,7 @@ int enic_get_vnic_config(struct enic *enic)
GET_CONFIG(intr_timer_usec);
GET_CONFIG(loop_tag);
GET_CONFIG(num_arfs);
+ GET_CONFIG(mq_subvnic_count);
GET_CONFIG(max_rq_ring);
GET_CONFIG(max_wq_ring);
GET_CONFIG(max_cq_ring);
diff --git a/drivers/net/ethernet/cisco/enic/vnic_enet.h b/drivers/net/ethernet/cisco/enic/vnic_enet.h
index 9e8e86262a3f..519d2969990b 100644
--- a/drivers/net/ethernet/cisco/enic/vnic_enet.h
+++ b/drivers/net/ethernet/cisco/enic/vnic_enet.h
@@ -21,7 +21,9 @@ struct vnic_enet_config {
u16 loop_tag;
u16 vf_rq_count;
u16 num_arfs;
- u8 reserved[66];
+ u8 reserved1[32];
+ u16 mq_subvnic_count;
+ u8 reserved2[32];
u32 max_rq_ring; // MAX RQ ring size
u32 max_wq_ring; // MAX WQ ring size
u32 max_cq_ring; // MAX CQ ring size
--
2.43.0