[PATCH 9/9] serial: max3100: use new UPIO_BUS as iotype

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Now that we have a new UPIO_BUS I/O type, use it to register our serial
port. This allows the driver to work properly when using DT where
membase/iobase are not set.

Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/max3100.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 475b0a6efce4bec36aa4b94ccff83934dbdf9246..17a2ff410305142798ddbbb22b46f18eadce91aa 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -725,6 +725,7 @@ static int max3100_probe(struct spi_device *spi)
 	max3100s[i]->port.ops = &max3100_ops;
 	max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
 	max3100s[i]->port.line = i;
+	max3100s[i]->port.iotype = UPIO_BUS;
 	max3100s[i]->port.type = PORT_MAX3100;
 	max3100s[i]->port.dev = &spi->dev;
 

-- 
2.47.3