Re: [PATCH 1/2] dt-bindings: hwmon: pmbus: ti,lm25066: add current limit properties

[Conor Dooley]

On Fri, Jun 12, 2026 at 05:10:38PM +0800, Potin Lai wrote:
> On Fri, Jun 12, 2026 at 1:27 AM Conor Dooley <conor@xxxxxxxxxx> wrote:
> >
> > On Thu, Jun 11, 2026 at 05:58:44PM +0800, Potin Lai wrote:
> > > Add mutually exclusive 'ti,cl-smbus-high' and 'ti,cl-smbus-low' boolean
> > > properties to configure the device's Current Limit (CL) behavior using
> > > SMBus settings instead of physical pins.
> > >
> > > Signed-off-by: Potin Lai <potin.lai.pt@xxxxxxxxx>
> > > ---
> > >  .../devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml  | 20 ++++++++++++++++++++
> > >  1 file changed, 20 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
> > > index a20f140dc79a..95ea7c26dec2 100644
> > > --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
> > > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
> > > @@ -46,6 +46,26 @@ properties:
> > >
> > >      additionalProperties: false
> > >
> > > +  ti,cl-smbus-high:
> > > +    description: |
> > > +      Configure the Current Limit (CL) to use the SMBus high setting.
> > > +    type: boolean
> > > +
> > > +  ti,cl-smbus-low:
> > > +    description: |
> > > +      Configure the Current Limit (CL) to use the SMBus low setting.
> > > +    type: boolean
> >
> > What's smbus specific about this? If the pin was connected to a GPIO,
> > you'd then need to have different properties or use these ones with an
> > inaccurate name.
> >
> 
> The "smbus" in the property name was originally meant to indicate
> that the setting is configured via the internal register over the SMBus (I2C)
> interface, rather than physical pins.

Right, but if you do it via the physical pins using a gpio, you still
need a way to say what limit is. The status quo only works if the limit
pin is tied high or low.

> 
> > Please also spell out "current-limit".
> >
> 
> I will rename the properties to "ti,current-limit-high" and
> "ti,current-limit-low"
> in the next version.

Other thing that might be worth doing is making the property a string
and just having `ti,current-limit = "low"` etc.

Attachment: signature.asc
Description: PGP signature