Re: [PATCH 2/4] arm64: dts: qcom: pm8005: Add temp alarm node

[Dmitry Baryshkov]

On Sat, Jun 13, 2026 at 01:39:22PM +0530, Jishnu Prakash wrote:
> Add temperature alarm node, used for PMIC thermal mitigation.
> 
> Co-developed-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
> Signed-off-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm8005.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> index 0f0ab2da8305..180809a0ee73 100644
> --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -11,6 +11,14 @@ pm8005_lsid0: pmic@4 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pm8005_tz: temp-alarm@2400 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0x2400>;
> +			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			#thermal-sensor-cells = <0>;
> +			status = "disabled";

Missing thermal zone, also enable it by default.

> +		};
> +
>  		pm8005_gpios: gpio@c000 {
>  			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
> 
> -- 
> 2.43.0
> 

-- 
With best wishes
Dmitry