[PATCH] net: phy: realtek: Clear MDIO_AN_10GBT_CTRL_ADV10G bit
From: Jan Klos
Date: Thu Jun 18 2026 - 21:17:11 EST
On RTL8127A connected to a link partner that advertises 10000baseT
speed cannot be changed to anything other than 10000baseT as 10GbE
is always advertised regardless of any setting. Fix this by
clearing MDIO_AN_10GBT_CTRL_ADV10G bit in rtl822x_config_aneg()'s
call to phy_modify_mmd_changed().
Signed-off-by: Jan Klos <honza.klos@xxxxxxxxx>
---
drivers/net/phy/realtek/realtek_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 27268811f564..b65d0f5fa1a0 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -1802,7 +1802,8 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2,
RTL_MDIO_AN_10GBT_CTRL,
MDIO_AN_10GBT_CTRL_ADV2_5G |
- MDIO_AN_10GBT_CTRL_ADV5G, adv);
+ MDIO_AN_10GBT_CTRL_ADV5G |
+ MDIO_AN_10GBT_CTRL_ADV10G, adv);
if (ret < 0)
return ret;
}
base-commit: 7d8297e26b4e20b5d1c3c3fe51fe81a1c7fbc823
--
2.54.0