Re: [PATCH v3 2/2] arm64: dts: qcom: lemans-evk: Describe the PCIe M.2 Key E connector

[Konrad Dybcio]

On 6/22/26 8:41 AM, Wei Deng wrote:
> The lemans EVK has the PCIe M.2 Mechanical Key E connector to connect
> wireless connectivity cards over PCIe and UART interfaces. Hence,
> describe the connector node and link it with the PCIe 0 Root Port and
> UART17 nodes through graph port/endpoint.
> 
> The M.2 Key E connector is powered by a 3.3V fixed regulator
> (vreg_wcn_3p3) which is sourced from the board's 12V DC input rail
> (vreg_dcin_12v). Both regulators are always-on and are required by the
> pcie-m2-e-connector binding.
> 
> Also add the serial1 = &uart17 alias, which is required for the
> Bluetooth serdev device to be enumerated on the UART17 interface.
> 
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> Signed-off-by: Wei Deng <wei.deng@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad