[PATCH v2 1/5] mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore

[ziniu . wang_1]

From: Luke Wang <ziniu.wang_1@xxxxxxx>

The tuning save/restore during system PM is conditioned on
mmc_card_wake_sdio_irq(), but this check is unrelated to whether
tuning values need to be preserved. The actual requirement is that
the card keeps power during suspend and the controller is a uSDHC.

SDIO devices using out-of-band GPIO wakeup maintain power during
suspend but do not set the SDIO IRQ wake flag. In this case the
tuning delay values are not saved/restored.

Remove the unnecessary mmc_card_wake_sdio_irq() condition from both
the suspend save and resume restore paths.

Fixes: c63d25cdc59a ("mmc: sdhci-esdhc-imx: Save tuning value when card stays powered in suspend")
Signed-off-by: Luke Wang <ziniu.wang_1@xxxxxxx>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 18ecddd6df6f..6526d65538de 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -2064,8 +2064,7 @@ static int sdhci_esdhc_suspend(struct device *dev)
 	 * to save the tuning delay value just in case the usdhc
 	 * lost power during system PM.
 	 */
-	if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) &&
-	    esdhc_is_usdhc(imx_data))
+	if (mmc_card_keep_power(host->mmc) && esdhc_is_usdhc(imx_data))
 		sdhc_esdhc_tuning_save(host);
 
 	if (device_may_wakeup(dev)) {
@@ -2124,8 +2123,7 @@ static int sdhci_esdhc_resume(struct device *dev)
 	 * restore the saved tuning delay value for the device which keep
 	 * power during system PM.
 	 */
-	if (mmc_card_keep_power(host->mmc) && mmc_card_wake_sdio_irq(host->mmc) &&
-	    esdhc_is_usdhc(imx_data))
+	if (mmc_card_keep_power(host->mmc) && esdhc_is_usdhc(imx_data))
 		sdhc_esdhc_tuning_restore(host);
 
 	pm_runtime_put_autosuspend(dev);
-- 
2.34.1