[PATCH v1 1/1] arm64: dts: freescale: imx95-var-dart: enable NETC block control

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@xxxxxxxxxxxxx>

Enable the NETC block control node on the DART-MX95 SoM.

This is required for the NETC Ethernet ports to be enabled and used.

Signed-off-by: Stefano Radaelli <stefano.r@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
index d43270a1d907..174ded589d6f 100644
--- a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
@@ -178,6 +178,10 @@ &mu7 {
 	status = "okay";
 };
 
+&netc_blk_ctrl {
+	status = "okay";
+};
+
 &netc_emdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_emdio>, <&pinctrl_phy0res>;
-- 
2.47.3