Re: [PATCH 0/3] Add CCI and CAMSS support for Kaanapali

[Bjorn Andersson]

On Fri, 08 May 2026 01:36:44 -0700, Hangxiang Ma wrote:
> This series adds CCI and CAMSS support for Qualcomm Kaanapali SoC.
> 
> This series has been tested using the following commands with a downstream
> driver for S5KJN5 sensor.
> - media-ctl --reset
> - media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
> - media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> - media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> - yavta  --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F  /dev/video0
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: kaanapali: Add camss node
      commit: 7cc8ca0387f572a4d69941fe380e7a262342491d
[2/3] arm64: dts: qcom: kaanapali: Add CCI definitions
      commit: c25b80614c31a30b1b0f44fc5ae260aff90fa4aa
[3/3] arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl
      commit: b6f8ecb80c1f894bcd0c612bf0ed4c5fee52d287

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>