Re: [PATCH 0/3] Add CCI and CAMSS support for Kaanapali

[Hangxiang Ma]

On 7/8/2026 10:56 PM, Bjorn Andersson wrote:
> On Fri, 08 May 2026 01:36:44 -0700, Hangxiang Ma wrote:
> > This series adds CCI and CAMSS support for Qualcomm Kaanapali SoC.
> >
> > This series has been tested using the following commands with a downstream
> > driver for S5KJN5 sensor.
> > - media-ctl --reset
> > - media-ctl -V '"msm_csiphy2":0[fmt:SGBRG10/4096x3072]'
> > - media-ctl -V '"msm_csid0":0[fmt:SGBRG10/4096x3072]'
> > - media-ctl -V '"msm_vfe0_rdi0":0[fmt:SGBRG10/4096x3072]'
> > - media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
> > - media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> > - yavta  --capture=20 -I -n 5 -f SGBRG10P -s 4096x3072 -F  /dev/video0
> >
> > [...]
>
> Applied, thanks!
>
> [1/3] arm64: dts: qcom: kaanapali: Add camss node
>        commit: 7cc8ca0387f572a4d69941fe380e7a262342491d
> [2/3] arm64: dts: qcom: kaanapali: Add CCI definitions
>        commit: c25b80614c31a30b1b0f44fc5ae260aff90fa4aa
> [3/3] arm64: dts: qcom: kaanapali: Add camera MCLK pinctrl
>        commit: b6f8ecb80c1f894bcd0c612bf0ed4c5fee52d287
>
> Best regards,

Sorry Bjorn, the camss binding + driver series wasn't merged as 
expected, which would cause dt-binding checker failure. Could you please 
revert this series? Bryan expect us to rebase on his new re-arch camss 
and the binding/dtsi may be changed accordingly. Thanks a lot.

Best regards,
Hangxiang