[PATCH v5 4/6] arm64: dts: qcom: shikra: Add pin configuration for mclks

[Nihal Kumar Gupta]

Add pinctrl configuration for the four available camera master clocks.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 18da1380e52acdd8813625eaceac796e342efd16..d87a87b3a23cc869d35cbb9c2f802d425c9eb94d 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -387,6 +387,34 @@ cci_i2c1_sleep: cci-i2c1-sleep-state {
 				bias-pull-down;
 			};
 
+			cam_mclk0_default: cam-mclk0-default-state {
+				pins = "gpio34";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk1_default: cam-mclk1-default-state {
+				pins = "gpio35";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk2_default: cam-mclk2-default-state {
+				pins = "gpio96";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cam_mclk3_default: cam-mclk3-default-state {
+				pins = "gpio98";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";

-- 
2.34.1