Re: [PATCH v4 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations
From: Srinivas Kandagatla
Date: Tue Jul 14 2026 - 04:36:18 EST
On 7/12/26 2:41 PM, Prasad Kumpatla wrote:
> Add TDM DAI operations to q6apm-lpass-dais so AudioReach TDM
> backends can be configured through the normal ASoC hw_params and DAI
> setup flow.
>
> The TDM set_tdm_slot() callback validates the supported slot width and
> slot count, stores the active slot mask in the AudioReach module
> configuration, and leaves existing DMA, I2S and HDMI paths unchanged.
>
> Reuse the existing LPASS child-clock handling for TDM nodes as well as
> MI2S nodes, since TDM backends also request optional backend clocks
> through the machine driver set_sysclk() path.
>
> Signed-off-by: Prasad Kumpatla <prasad.kumpatla@xxxxxxxxxxxxxxxx>
> ---
> sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 57 +++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> index 5743586ff..672189625 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> @@ -372,6 +372,50 @@ static int q6i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> return 0;
> }
>
> +static int q6tdm_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
> + unsigned int rx_mask, int slots, int slot_width)
> +{
> + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
> + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
> + unsigned int cap_mask;
> +
> + if (slot_width != 16 && slot_width != 32) {
> + dev_err(dai->dev, "%s: invalid slot_width %d\n", __func__, slot_width);
> + return -EINVAL;
> + }
> +
> + switch (slots) {
> + case 2:
> + cap_mask = 0x03;
> + break;
> + case 4:
> + cap_mask = 0x0f;
> + break;
> + case 8:
> + cap_mask = 0xff;
> + break;
> + case 16:
> + cap_mask = 0xffff;
> + break;
switch (slots) {
case 2:
case 4:
case 8:
case 16:
cap_mask = GENMASK(slots - 1, 0);
break;
?
> + default:
> + dev_err(dai->dev, "%s: invalid slots %d\n", __func__, slots);
> + return -EINVAL;
> + }
> +
> + switch (dai->id) {
> + case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
> + cfg->nslots_per_frame = slots;
> + cfg->slot_width = slot_width;
> + cfg->slot_mask = ((dai->id & 0x1) ? tx_mask : rx_mask) & cap_mask;
Should we validate the tx/rx mask here if its with in cap_mask range?
> + break;
> + default:
> + dev_err(dai->dev, "%s: invalid dai id 0x%x\n", __func__, dai->id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static const struct snd_soc_dai_ops q6dma_ops = {
> .prepare = q6apm_lpass_dai_prepare,
> .startup = q6apm_lpass_dai_startup,
> @@ -401,6 +445,17 @@ static const struct snd_soc_dai_ops q6hdmi_ops = {
> .trigger = q6apm_lpass_dai_trigger,
> };
>
> +static const struct snd_soc_dai_ops q6tdm_ops = {
> + .prepare = q6apm_lpass_dai_prepare,
> + .startup = q6apm_lpass_dai_startup,
> + .shutdown = q6i2s_lpass_dai_shutdown,
> + .set_tdm_slot = q6tdm_set_tdm_slot,
> + .hw_params = q6dma_hw_params,
> + .set_fmt = q6i2s_set_fmt,
> + .set_sysclk = q6i2s_set_sysclk,
> + .trigger = q6apm_lpass_dai_trigger,
> +};
> +
> static const struct snd_soc_component_driver q6apm_lpass_dai_component = {
> .name = "q6apm-be-dai-component",
> .of_xlate_dai_name = q6dsp_audio_ports_of_xlate_dai_name,
> @@ -429,6 +484,7 @@ static int of_q6apm_parse_dai_data(struct device *dev,
> case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
> case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
> case SENARY_MI2S_RX ... SENARY_MI2S_TX:
> + case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
> priv = &data->priv[id];
> priv->mclk = of_clk_get_by_name(node, "mclk");
> if (IS_ERR(priv->mclk)) {
> @@ -490,6 +546,7 @@ static int q6apm_lpass_dai_dev_probe(struct platform_device *pdev)
> cfg.q6i2s_ops = &q6i2s_ops;
> cfg.q6dma_ops = &q6dma_ops;
> cfg.q6hdmi_ops = &q6hdmi_ops;
> + cfg.q6tdm_ops = &q6tdm_ops;
> dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais);
>
> ret = devm_snd_soc_register_component(dev, &q6apm_lpass_dai_component, dais, num_dais);