[PATCH v3] PCI: starfive: Fix resource leaks on error paths in host_init()

[Ali Tariq]

starfive_pcie_host_init() acquires the PHY, clocks/resets, and an
optional regulator in sequence, but does not correctly unwind these
resources when a later step fails.

If starfive_pcie_clk_rst_init() fails after the PHY has already been
successfully enabled, the function returns directly without disabling
the PHY, leaking it and leaving it powered.

If regulator_enable() fails for the optional vpcie3v3 regulator, the
failure is only logged; the function falls through and returns
success, leaving the driver believing the regulator is enabled while
continuing to configure PCIe hardware that may be unpowered. This
also leaves the clocks and PHY enabled with nothing to clean them up.

Disable the PHY on the clk/reset failure path, and disable the
clocks/resets and PHY, then return the error, if the regulator fails
to enable.

Build-tested and boot-tested on StarFive VisionFive 2 v1.2A

Fixes: 05a75df4182e ("PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots")
Fixes: 39b91eb40c6a ("PCI: starfive: Add JH7110 PCIe controller")
Signed-off-by: Ali Tariq <alitariq45892@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
Changes in v3:
- Add Fixes: tags for both introducing commits
- Add Cc: stable@xxxxxxxxxxxxxxx

Changes in v2:
- Use a shared error-handling label instead of duplicating cleanup code
---
 drivers/pci/controller/plda/pcie-starfive.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index ba8ef7842e35..fab44054a5de 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -304,12 +304,14 @@ static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
 
 	ret = starfive_pcie_clk_rst_init(pcie);
 	if (ret)
-		return ret;
+		goto err_disable_phy;
 
 	if (pcie->vpcie3v3) {
 		ret = regulator_enable(pcie->vpcie3v3);
-		if (ret)
+		if (ret) {
 			dev_err_probe(dev, ret, "failed to enable vpcie3v3 regulator\n");
+			goto err_clk_rst;
+		}
 	}
 
 	if (pcie->reset_gpio)
@@ -379,6 +381,13 @@ static int starfive_pcie_host_init(struct plda_pcie_rp *plda)
 		dev_info(dev, "port link down\n");
 
 	return 0;
+
+err_clk_rst:
+	starfive_pcie_clk_rst_deinit(pcie);
+err_disable_phy:
+	starfive_pcie_disable_phy(pcie);
+
+	return ret;
 }
 
 static const struct plda_pcie_host_ops sf_host_ops = {
-- 
2.34.1