[PATCH 2/3] arm64: dts: qcom: kodiak: mark PCIe root port as bridge

[Rahul Samana]

Add the PCI class compatible to pcie0_port so child nodes below the PCI
bridge can be matched against the enumerated PCI topology.

This is needed by the M.2 E-key graph description used by the RB3 Gen 2
Industrial mezzanine Bluetooth UART overlay.

Signed-off-by: Rahul Samana <rahul.samana@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index fa540d8c2615..12594967d2c2 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -2296,6 +2296,7 @@ pcie0: pcie@1c00000 {
 			status = "disabled";
 
 			pcie0_port: pcie@0 {
+				compatible = "pciclass,0604";
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;

-- 
2.34.1