Re: [PATCH] Revert "scsi: ufs: core: Remove unnecessary block I/O quiesce for clock scaling"

[Konrad Dybcio]

On 7/23/26 2:47 PM, Manivannan Sadhasivam wrote:
> This reverts commit 85b2b966285498e1b551ac85f02c79cd06c0cff0.
> 
> Qcom UFS Host Controllers do not support scaling clocks when the traffic is
> ongoing. But the offending commit removed the block I/O quiesce in the
> clock scaling path, which causes below UFS failures during clock scaling:
> 
> ufshcd-qcom 1d84000.ufshc: ufshcd_check_errors: saved_err 0x80 saved_uic_err 0x0
> ufshcd-qcom 1d84000.ufshc: ufshcd_err_handler started; HBA state eh_fatal; powered 1; shutting down 0; saved_err = 0x80; saved_uic_err = 0x0; force_reset = 0
> ufshcd-qcom 1d84000.ufshc: pwr ctrl cmd 0x2 with (MIBattribute 0x1571, mode 0x11) completion timeout
> ufshcd-qcom 1d84000.ufshc: UFS Host state=3
> ufshcd-qcom 1d84000.ufshc: 7 outstanding reqs, tasks=0x0
> ufshcd-qcom 1d84000.ufshc: saved_err=0x80, saved_uic_err=0x0
> ufshcd-qcom 1d84000.ufshc: Device power mode=1, UIC link state=1
> ufshcd-qcom 1d84000.ufshc: PM in progress=0, sys. suspended=0
> ufshcd-qcom 1d84000.ufshc: Auto BKOPS=0, Host self-block=0
> ufshcd-qcom 1d84000.ufshc: Clk gate=1
> ufshcd-qcom 1d84000.ufshc: last_hibern8_exit_tstamp at 196451913 us, hibern8_exit_cnt=20
> ufshcd-qcom 1d84000.ufshc: error handling flags=0x0, req. abort count=0
> ufshcd-qcom 1d84000.ufshc: hba->ufs_version=0x300, Host capabilities=0x1587031f, caps=0x124f
> ufshcd-qcom 1d84000.ufshc: quirks=0x0, dev. quirks=0x310c4
> ufshcd-qcom 1d84000.ufshc: UFS dev info: SAMSUNG  KLUDG4UHDB-B2D1  rev 0400
> ufshcd-qcom 1d84000.ufshc: clk: core_clk, rate: 300000000
> ufshcd-qcom 1d84000.ufshc: clk: core_clk_unipro, rate: 300000000
> 
> Hence, revert the commit to bring back UFS on all Qcom platforms.
> 
> Reported-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
> Closes: https://lore.kernel.org/linux-scsi/al8YkXydXJQZrl_Y@QCOM-aGQu4IUr3Y
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> ---

Tested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx> # SC8280XP CRD

Konrad