Re: [PATCH v2 3/3] i2c: qcom-cci: Fix CCI clock rate enforcement

[Mukesh Savaliya]

On 7/27/2026 2:51 PM, Loic Poulain wrote:
[...]

> @@ -587,6 +618,24 @@ static int cci_probe(struct platform_device *pdev)
>   		return dev_err_probe(dev, -EINVAL, "not enough clocks in DT\n");
>   	cci->nclocks = ret;
>   
> +	cci->cci_clk = devm_clk_get(dev, "cci");
> +	if (IS_ERR(cci->cci_clk))
> +		return dev_err_probe(dev, PTR_ERR(cci->cci_clk),
> +				     "failed to get CCI clock\n");
> +
> +	ret = devm_pm_opp_set_clkname(dev, "cci");
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to set CCI OPP clk\n");
> +
> +	/* OPP table is optional */
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (ret && ret != -ENODEV)
> +		return dev_err_probe(dev, ret, "failed to add OPP table\n");
> +

if this is an optional why to return with an error ? IMO, further 
operations should continue which are not opp dependent ?

> +	ret = cci_set_core_rate(cci, cci->data->cci_clk_rate);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to set CCI clock rate\n");
> +
>   	ret = cci_enable_clocks(cci);
>   	if (ret < 0)
>   		return ret;